50PS11-UB (CHASSIS:PU92B) - LG TV Service Manual (repair manual). Page 9

Read LG 50PS11-UB (CHASSIS:PU92B) Service Manual online

- 9 -
(2) 50FHD Va Adjustment (refer fig. 2)  
1) After receiving 100% Full White Pattern, HEAT RUN.
2) Connect + terminal of D.M.M. to Va pin of P811, connect -
terminal to GND pin of P811.
3) After turning VR501,voltage of D.M.M adjustment as same
as Va voltage which on label of panel right/top  (deviation;
±0.5V)
(3) 50FHD Vs Adjustment (refer fig. 2)
1) Connect + terminal of D. M..M. to Vs pin of P811, connect -
terminal to GND pin of P811.
2) After turning VR901, voltage of D.M.M adjustment as same
as Vs voltage which on label of panel right/top  (deviation ;
±0.5V)
(4) 60FHD Va Adjustment (refer fig. 3)  
1) After receiving 100% Full White Pattern, HEAT RUN.
2) Connect + terminal of D.M.M. to Va pin of P812, connect -
terminal to GND pin of P812.
3) After turning VR901,voltage of D.M.M adjustment as same
as Va voltage which on label of panel right/top  (deviation;
±0.5V)
(5) 60FHD Vs Adjustment (refer fig. 3)
1) Connect + terminal of D. M..M. to Vs pin of P812, connect -
terminal to GND pin of P812.
2) After turning VR951, voltage of D.M.M adjustment as same
as Vs voltage which on label of panel right/top  (deviation ;
±0.5V)
7. DDC EDID Write
MODEL NAME:  LG TV (Not necessary)
Caution: Please only check write status in Instart-menu
7-1. Manual Download(using DFT)
PC(for  communication  through  RS-232C),  UART  baud  rate:
115200 bps
Command : aa 00 00 (Start Factory mode)
Command : ae 00 10 (Download All EDID)
Command : aa 00 90 (End of Factory mode)
7-2. Manual EDID D/L using Service Remocon
(1)  After  enter  Service  Mode  by  pushing  “ADJ”  key,  select  “4.
EDID D/L”.
(2) Finally execute “START” by pushing “
G
” or “
9
”key. 
(Fig. 2)  50FHD Power PCB Assy Voltage Adjustment
(Fig. 3)  60FHD Power PCB Assy Voltage Adjustment

Display

Click on the first or last page to see other 50PS11-UB (CHASSIS:PU92B) service manuals if exist.

Random: