Read LG 50PQ60D-SA (CHASSIS:PB92A) Service Manual online
4. Using RS-232C
Adjust 3 items at 3.1 PCB assembly adjustments “4.1.3
sequence” one after the order.
sequence” one after the order.
O
Adjustment protocol
See ADC Adjustment RS232C Protocol_Ver1.0
4-1. Necessary items before Adjustment items
(1) Pattern Generator : (MSPG-925FA)
(2) Adjust 480i Comp1 (MSPG-925FA:model :209, pattern
(2) Adjust 480i Comp1 (MSPG-925FA:model :209, pattern
:65) - Comp1 Mode
(3) Adjust 1080p Comp1 (MSPG-925FA:model :225 , pattern
:65) - Comp1 Mode
(4) Addjust RGB (MSPG-925FA:model :225 , pattern :65) -
RGB-PC Mode
* If you want more information then see the below Adjustment
method (Factory Adjustment)
4-2. Adjustment sequence
(1) aa 00 00: Enter the ADC Adjustment mode.
(2) xb 00 40: Change the mode to Component1 (No actions)
(3) ad 00 10: Adjust 480i Comp
(4) ad 00 10: Adjust 1080p comp
(5) xb 00 60: Change to RGB-PC mode(No action)
(6) ad 00 10: Adjust 1080p RGB
(7) xb 00 90: Endo of Adjustmennt
(2) xb 00 40: Change the mode to Component1 (No actions)
(3) ad 00 10: Adjust 480i Comp
(4) ad 00 10: Adjust 1080p comp
(5) xb 00 60: Change to RGB-PC mode(No action)
(6) ad 00 10: Adjust 1080p RGB
(7) xb 00 90: Endo of Adjustmennt
5. Auto Adjust Component
480i/1080p RGB 1080p
5-1. Summary
Adjustment component 480i/1080i and RGB 1080p is Gain
and Black level setting at Analog to Digital converter, and
compensate the RGB deviation
and Black level setting at Analog to Digital converter, and
compensate the RGB deviation
5-2. Using instrument
Adjustment remocon, 801GF(802B, 802F, 802R) or
MSPG925FA pattern generator
(It can output 480i/1080i horizontal 100% color bar pattern
signal, and its output level must setting 0.7V±0.1V p-p
correctly)
MSPG925FA pattern generator
(It can output 480i/1080i horizontal 100% color bar pattern
signal, and its output level must setting 0.7V±0.1V p-p
correctly)
* You must make it sure its resolution and pattern cause every
instrument can have different setting
5-3. Adjustment method 480i Comp1,
Adjust 1080p Comp1/RGB
(Factory adjustment)
(1) ADC 480i Component1 adjustment
- Check connection of Component1
- MSPG-925FA ==> Model: 209, Pattern 65
- MSPG-925FA ==> Model: 209, Pattern 65
(2) Set Component 480i mode and 100% Horizontal Color Bar
Pattern(HozTV31Bar), then set TV set to Component1
mode and its screen to “NORMAL”
mode and its screen to “NORMAL”
(3) ADC 1080p Component1 / RGB adjustment
- Check connection both of Component1 and RGB
- MSPG-925FA ==> Model: 225, Pattern 65
- MSPG-925FA ==> Model: 225, Pattern 65
(4) Set Component 1080p mode and 100% Horizontal Color
Bar Pattern(HozTV31Bar), then set TV set to Component1
mode and its screen to “NORMAL”
mode and its screen to “NORMAL”
(5) After get each the signal, wait more a second and enter
the “IN-START” with press IN-START key of Service
remocon. After then select “7. External ADC” with navigator
button and press “Enter”.
remocon. After then select “7. External ADC” with navigator
button and press “Enter”.
(6) After Then Press key of Service remocon “Right
Arrow(VOL+)”
(7) You can see “ADC Component1 Success”
(8) Component1 1080p, RGB 1080p Adjust is same method.
(9) Component 1080p Adjustment in Component1 input mode
(10) RGB 1080p adjustment in RGB input mode
(11) If you success RGB 1080p Adjust. You can see “ADC
(8) Component1 1080p, RGB 1080p Adjust is same method.
(9) Component 1080p Adjustment in Component1 input mode
(10) RGB 1080p adjustment in RGB input mode
(11) If you success RGB 1080p Adjust. You can see “ADC
RGB-DTV Success”
- 11 -
Adjustment pattern : 480i / 1080p 60Hz Pattern
Click on the first or last page to see other 50PQ60D-SA (CHASSIS:PB92A) service manuals if exist.