50PQ600R-ZA (CHASSIS:PP91B) - LG TV Service Manual (repair manual). Page 10

(6) Select SW file (XXXX.bin) you want, push the “OK” Key.
(7) S/W download process is excuted automatically.

Tool Option
Area Option
Option 1
Option 2
Option 3(Available for EU & Non EU model)

* Profile: Must be changed the option value because being

different with some setting value depend on module, inch
and market 

* Equipment : Adjustment Remote Controller

(1) Push the IN-START key in the Adjust R/C.
(2) Enter Password number. The value of Password is “0 0 0

0”.

(3) Input the Option Number that was specified in the BOM,

into the Shipping area.

(4) Select “Tool Option/ Area Option” by using 

D

/

E

(CH+/-)

key, and press the number key(0~9) consecutively
ex) If the value of Tool Option1 is 4, input the data using

number key “4” (Fig. 3)

Caution: Don’t Push “IN-STOP” key after PCB assembly

adjustment.

(5) EDID D/L Method

After software D/L or PCBA manufacturing, you can
download EDID Data.
When you adjust Tool Option, H6 Model EDID download
process is executed automatically

* If the model don’t have HDMI 3, HDMI 3 will be disappeared

at OSD Window.

Caution: When you adjust tool option, don’t connect HDMI or D-

sub cable. 
If you connect some cable, EDID D/L process will be
failed. 

(6) Adjustment method    

Before PCBA check, have to change the Tool option and Area
option  

[

About PDP

After done all adjustments, Press IN-START button and
compare Tool option and Area option value with its BOM, if it
is correctly same then Change “RF mode” and then unplug
the AC cable.
If it is not same, then correct it same with BOM and unplug AC
cable. 
For correct it to the model’s module from factory JIG model.

[

Don’t push The IN-STOP KEY after completing the function

inspection.

- 10 -

..

..

MODEL : XXXXXX     Module : XXXX
S/W Ver. : X.XX          ROM : XXXXXXX
UTT                X           Temp : xxxxx : Celsius
ADC CAL.
RGB :

    OK  

Component SD

    OK 

Component HD

    OK 

EDID    RGB(OK)  HDMI1(NG)  HDMI2(NG)  HDMI3(NG)

Tool Option     

   

4

Area Option    

  40

Option 1

                      17

Option 2

                      40

..

MODEL : XXXXXX     Module : XXXX
S/W Ver. : X.XX          ROM : XXXXXXX
UTT                X           Temp : xxxxx : Celsius
ADC CAL.
RGB :

    OK  

Component SD

    OK 

Component HD

    OK 

EDID    RGB(OK)  HDMI1(OK)  HDMI2(OK)  HDMI3(OK)

Tool Option     

   

4

Area Option    

  40

Option 1

                      17

Option 2

                      40

( Fig. 3)