Read LG 50PM4M-WA (CHASSIS:PM75A) Service Manual online
12. Manual White Balance(AV)
1) Execute CA-100 Zero Calibration.
2) Execute the SET Heat Run for 30minutes
3) As below Fig.6, Supply 216Level (85 IRE) full screen
2) Execute the SET Heat Run for 30minutes
3) As below Fig.6, Supply 216Level (85 IRE) full screen
pattern to Video input.
4) Press the FRONT-AV KEY on R/C for converting input
mode.
5) Set the PSM to Standard mode in Picture menu.
6) Enter the White Balance adjustment mode by pressing the
6) Enter the White Balance adjustment mode by pressing the
INSTART key twice(White Balance) on R/C.
7) Stick sensor to center of the screen and select each items
(Red/Green/Blue Gain and Offset) using
D
/
E
(CH+/-) key
on R/C..
8) Adjust Only High Light with R Gain / B Gain using
F
/
G
(VOL+/-) key on R/C.
9) Adjust it until color coordination becomes as below.
(1) X-axis : 0.283
±
0.003
(2) Y-axis : 0.298
±
0.003
( R/G/B gain and R/G/B offset Default values are different
in according to using module )
10) Adjust High light with R/B Gain.
13. Shipped condition
(1) 1) Push the IN-START key in a Adjust Remocon.
(2) Input the Option Number that was specified in the BOM,
(2) Input the Option Number that was specified in the BOM,
into the Shipping area.
(3) The work is finished, Push
V
Key.
(4) If you finished option data input, then press in
- 10 -
(Fig.6)
Click on the first or last page to see other 50PM4M-WA (CHASSIS:PM75A) service manuals if exist.