50PJ260R-MB (CHASSIS:PP01A) - LG TV Service Manual (repair manual). Page 7

Read LG 50PJ260R-MB (CHASSIS:PP01A) Service Manual online

- 7 -
ADJUSTMENT INSTRUCTION
1. Application Range
This spec sheet is applied to all of the PP01A chassis. 
2. Specification
(1) Because this is not a hot chassis, it is not necessary to use
an  isolation  transformer.  However,  the  use  of  isolation
transformer will help protect test instrument.
(2) Adjustment must be done in the correct order.
(3) The adjustment must be performed in the circumstance of
25 °C ± 5 °C of temperature and 65 % ± 10 % of relative
humidity if there is no specific designation.
(4) The  input  voltage  of  the  receiver  must  keep  100  V
~ 240 V, 50 / 60 Hz.
(5) The receiver must be operated for about 5 minutes prior to
the adjustment when module is in the circumstance of over
15 °C
- In case of keeping module is in the circumstance of 0 °C,
it  should  be  placed  in  the  circumstance  of  above  15  °C
for 2 hours
- In case of keeping module is in the circumstance of below
-20 °C, it should be placed in the circumstance of above
15 °C for 3 hours,.
3. S/W Program Download
3-1. Profile
This  is  for  downloading  the  s/w  to  the  flash  memory  of  the
IC402
3-2. Equipment 
(1) PC
(2) ISP_tool program
(3) Download jig
3-3. Connection Structure
3-4. Connection Condition
(1) IC name and circuit number : Flash Memory and IC402
(2) Use voltage : 3.3V (5 pin)
(3) SCL : 15 pin
(4) SDA : 12 pin
(5) Tact time : about 2min and 30seconds
3-5. Download Method (By using MSTAR JIG)
(1) Preliminary Steps
1) Connect the download jig to D-sub jack
2) Connect the PC to USB jack
(2) Download Steps
1) Execute ‘ISP Tool’ program in PC, then a main window
will be opened
2) Click the connect button and confirm “Dialog Box”.
Double click
Page of 34
Display

Click on the first or last page to see other 50PJ260R-MB (CHASSIS:PP01A) service manuals if exist.