Read LG 50PG6500-ZA (CHASSIS:PD82A) Service Manual online
12. Default Value in Adjustment mode
12-1. Auto Color Balance
12-2. Write Balance
13. EEPROM Data Write(Serial No D/L)
13-1. Signal TABLE
CMD
: A0h
LENGTH : 85~94h (1~16 bytes)
ADH
ADH
: E
2
PROM Sub Address high (00~1F)
ADL
: E
2
PROM Sub Address low (00~FF)
Data
: Write data
CS
: CMD + LENGTH + ADH + ADL + Data_1 + ... + Data_n
Delay
: 20ms
13-2. Command Set
* Description
FOS Default write : <7mode data> write
Vtotal, V_Frequency, Sync_Polarity, Htotal, Hstart, Vstart, 0, Phase
Data write : Model Name and Serial Number write in EEPROM,.
Vtotal, V_Frequency, Sync_Polarity, Htotal, Hstart, Vstart, 0, Phase
Data write : Model Name and Serial Number write in EEPROM,.
13-3. Method & Notice
(1) Serial number D/L is using of scan equipment.
(2) Setting of scan equipment operated by Manufacturing
(2) Setting of scan equipment operated by Manufacturing
Technology Group.
(3) Serial number D/L must be conformed when it is produced
in production line, because serial number D/L is mandatory
by D-book 4.0.
by D-book 4.0.
14. Set Information
(Serial No& Model name, Option Table)
14-1. Setting up ‘Tool Option1,2’
(After setting white balance, this is set)
(Setting: Press ADJ Key in the Adjust remocon)
(1) Press ADJ Key in the R/C for adjustment.
(2) Insert Option value by a number key.
(3) Press the Enter Button.
(2) Insert Option value by a number key.
(3) Press the Enter Button.
- 11 -
(Fig. 7) Default on OSD
<Component>
<RGB>
<AV>
(Fig. 8) Default on OSD
CMD LENGTH ADH ADL DATA_1
DATA_n
...
CS
DELAY
Model
Name
42PG6500
Tool
Option1
10240
1697
0
14
2
1
192
Tool
Option2
Area
Option
Option1 Option2 Option3 Option4
No
1
EEPROM WRITE A0h
84h+n
n-byted Write
(n=1~16)
Adjust mode
CMD(hex) LENGTH(hex)
Description
Click on the first or last page to see other 50PG6500-ZA (CHASSIS:PD82A) service manuals if exist.