Read LG 50PG6000-ZA (CHASSIS:PD81A) Service Manual online
- 9 -
10-2. Connection Picture of the Measuring
Instrument(On Automatic control)
(1) Inside PATTERN is used when W/B is controlled. Connect
to auto controller or push control R/C IN-START -> Enter
the mode of White-Balance, the pattern will come out.
the mode of White-Balance, the pattern will come out.
10-3. Auto-control interface and directions
(1) Adjust in the place where the influx of light like floodlight
around is blocked.(illumination is less than 10ux)
(2) Measure and adjust after sticking the Color Analyzer(CA-
100+, CA210) to the side of the module.
(3) Aging time
- After aging start, keep the power on(no suspension of
power supply) and heat-run over 15 minutes.
- keep white pattern using inside pattern.
A
Auto adjustment Map(RS-232C)
11. Adjustment of White Balance
(1) Press ADJ KEY on R/C and enter EZ ADJUST.
Select “3. Test Pattern” by using
D
/
E
(CH+/-) and press
ENTER(
V
)
Select “White” by using
F
/
G
(VOL+/-) and press ENTER(
V
)
and heat run over 15minutes.
(2) Zero Calibrate CA-100+/CA-210, and when controlling,
stick the sensor to the center of PDP module.
(3) Press ADJ KEY on R/C and enter EZ ADJUST.
Select “2. White Balance” and press
G
(VOL +).
Set test-pattern on and display inside pattern.
(5) Control is carried out on three color temperatures, COOL,
MEDIUM,WARM.
(Control is carried out thress times)
(Control is carried out thress times)
<Temperature : COOL>
- R-Cut / G-Cut / B-Cut is set to 64/
- Control R-Gain and G-Gain.
- Each Gain is limited to 192.
- Control R-Gain and G-Gain.
- Each Gain is limited to 192.
<Temperature : MEDIUM>
- R-Cut / G-Cut / B-Cut is set to 64/
- Control R-Gain and G-Gain.
- Each Gain is limited to 192.
- Control R-Gain and G-Gain.
- Each Gain is limited to 192.
<Temperature : WARM>
- R-Cut / G-Cut / B-Cut is set to 64/
- Control G-Gain and B-Gain.
- Each Gain is limited to 192.
- Control G-Gain and B-Gain.
- Each Gain is limited to 192.
12. Input the Shipping Option Data
1) Push the IN-START key in a Adjust Remocon.
2) Input the Option Number that was specified in the BOM, into
2) Input the Option Number that was specified in the BOM, into
the Shipping area.
3) The work is finished, Push
V
Key.
13. Set Information
(Serial No& Model name)
13-1. Check the serial number & Model Name
(1) Push the menu button in DTV mode.
(2) Select the SETUP -> Diagnostics -> To set.
(3) Check the Serial Number.
(2) Select the SETUP -> Diagnostics -> To set.
(3) Check the Serial Number.
(Fig.6) Auto AV(CVBS) Color Balance Test Pattern
Full White Pattern
RS-232C Communication
CA-210
Color
ANALYZER
TYPE : CA-210
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
Cool
MedWarm
Cool
Med
Warm
jg
Ja
js
00
192
192
192
255
jh
Jb
je
00
192
192
192
255
ji
Jc
jf
00
192
192
192
255
62
63
66
128
58
57
62
128
71
71
64
128
RS-232C COMMAND
[CMD ID DATA]
Min
CENTER
(DEFAULT)
MAX
50PG1
Click on the first or last page to see other 50PG6000-ZA (CHASSIS:PD81A) service manuals if exist.