Read LG 50PG20R-TA (CHASSIS:PP81A) Service Manual online
- 13 -
10. Default Value in Adjustment
10-1. White Balance
(Default values maybe modified the module condition)
10-2. Press CH write condition
(1) AC on tilme on only one after assembled automatically
(2) CH recover SVC OSD manually
(2) CH recover SVC OSD manually
12. Sound spec.
Caution: Each PCB assembly must be checked by check JIG set.
(Because power PCB Assembly damages to PDP
Module, especially be careful)
Module, especially be careful)
13. POWER PCB Assy Voltage
Adjustment
(Va, Vs voltage Adjustment)
13-1. Test Equipment:
D.M.M 1EA
13-2. Connection Diagram for Measuring
Refer to Fig. 5
13-3. Adjustment Method
(1) Va Adjustment
1) After receiving 100% Full White Pattern, HEAT RUN.
2) Connect + terminal of D. M..M. to Va pin of P812,
2) Connect + terminal of D. M..M. to Va pin of P812,
connect -terminal to GND pin of P812.
3) After turning VR901,voltage of D.M.M adjustment as
same as Va voltage which on label of panel right/top
(deviation; ±0.5V)
(deviation; ±0.5V)
(2) Vs Adjustment
1) Connect + terminal of D. M..M. to Vs pin of P812,
connect -terminal to GND pin of P812.
2) After turning VR951 401, voltage of D.M.M adjustment
as same as Vs voltage which on label of panel right/top
( deviation ; ±0.5V)
( deviation ; ±0.5V)
<Fig. 5> Connection Diagram of Power Adjustment for Measuring
Item
Dielectric Voltage (AC <-> FG)
Dielectric Voltage (Without FG)
Value
1.5
1.5
3
3
Unit
kV
kV
Remark
At 100mA for 1sec (Line)
At 100mA for 1min (OQC)
At 100mA for 1sec (Line)
At 100mA for 1min (OQC)
Item
Min
Typ
Max
Unit
Remark
Audio Practical Max Output, L(Mono)/R
9
10
12
W
Click on the first or last page to see other 50PG20R-TA (CHASSIS:PP81A) service manuals if exist.