Read LG 50PC5D-ZB / 50PC5D1-ZD (CHASSIS:PD73A) Service Manual online
- 8 -
2) HDMI.
=> Detail EDID Options are below(a, b, c, d, e)
1. Product ID
2. Serial No : Controlled on production line
3. Month, Year : Controlled on production line
3. Month, Year : Controlled on production line
ex) Week : '03' => '03'
Year : '2006' => '10'
4. Model Name(Hex):
5. Checksum : Changeable by total EDID data
7. ADC Calibration
8. Auto AV(CVBS) Color Balance
8-1. Requirement
V
This AV color balance adjustment should be performed
before white Balance Adjustment.
8-2. Required Equipment
1) Remote controller for adjustment.
2) MSPG-925FS Pattern Generator (Which has Video Signal:
2) MSPG-925FS Pattern Generator (Which has Video Signal:
7 Color Bar Pattern shown in Fig. 3).
- Model: 202 / Pattern: 65 EC and FC model use PAL-
BGDHI. (composite signal)
- Model: 202 / Pattern: 65 EC and FC model use PAL-
BGDHI. (composite signal)
8-3. Method of Auto AV(CVBS) Color Balance
1) Input the Video signal: 7 color Bar signal into AV3.
2) Set the PSM to Dynamic mode in the Picture menu.
3) Press IN-STAR key on R/C for adjustment.
4) Press the
2) Set the PSM to Dynamic mode in the Picture menu.
3) Press IN-STAR key on R/C for adjustment.
4) Press the
G
(Vol. +) key operate to set, then it becomes
automatically.
5) Auto-RGB OK means completed adjustment.
9. Adjustment of Component
9-1. Requirement
V
This AV color balance adjustment should be performed
before white Balance Adjustment.
9-2. Required Equipment
1) Remote controller for adjustment.
2) MSPG-925FS Pattern Generator (Which has Video Signal:
2) MSPG-925FS Pattern Generator (Which has Video Signal:
7 Color Bar Pattern shown in Fig. 4).
- Model: 215 / Pattern: 65
- Model: 215 / Pattern: 65
9-3. Method of Auto Component Color Balance
1) Input the Component 720p/50Hz 7 Color Bar(MSPG-925FS
model:215, pattern:65) signal into Component.
2) Set the PSM to Dynamic mode in the Picture menu.
3) Press IN-STAR key on R/C for adjustment.
4) Press the
3) Press IN-STAR key on R/C for adjustment.
4) Press the
G
(Vol. +) key operate to set, then it becomes
automatically.
5) Auto-RGB OK means completed adjustment.
Model
Name
XXXX
Product ID
Product ID
EDID table
XXXX
Hex
XX
DEC
XX
XXXX
Model Name
XXXXX
Hex Data
XXXXX
1
2
3
4
5
5
MSPG925FS
Component
RGB-PC
RF/AV/S-VIDEO
ADC
Model : 3
(1024*768 60Hz)
Pattern : 65
7 Color Bar
Model:215(720P)
Pattern : 65
* 720/50Hz
7 Color Bar
PAL
INPUT SELECT AV3
Model : 202
(PAL-BGDHI)
Pattern : 65
* PAL 7 Color Bar
- System control RS-232 Host should be “PC“ for adjustment.
- Before AV ADC Calibration, execute the “Panel size selection“
- Before AV ADC Calibration, execute the “Panel size selection“
(Fig. 4) Color bar Test Pattern
(Fig. 3) Color Balance signal
Click on the first or last page to see other 50PC5D-ZB / 50PC5D1-ZD (CHASSIS:PD73A) service manuals if exist.