Read LG 50PC3DB-UL (CHASSIS:PA-63E) Service Manual online
- 11 -
ADJUSTMENT INSTRUCTIONS
[50PC3D-UE]
7-3. Adjustment of White Balance
O
Calibrate of the CA-100, then attach sensor to PDP module
surface when you adjust.
O
Manual adjustment is also possible by the following sequence.
(1) Enter ‘Ez - Adjust’ by pressing ADJ KEY on the Service
Remote Control.
(2) Select "9. WHITE PATTERN" using CH +/- Key and HEAT
RUN at least 30 minutes by pressing the ENTER Key.
(3) Receive the Window pattern signal from Digital Pattern
Generator.
(AV Input: connect the ‘HDMI’, Digital Pattern Generator input
Pattern => Model: 217, pattern: 6, opt: 106.64.48.1.216)
(AV Input: connect the ‘HDMI’, Digital Pattern Generator input
Pattern => Model: 217, pattern: 6, opt: 106.64.48.1.216)
(4) After attaching sensor to center of screen, select ‘6. White-
Balance’ of ‘Ez - Adjust’ by pressing the ADJ KEY on the
Service R/C. Then enter adjustment mode by pressing the
Right KEY (
Service R/C. Then enter adjustment mode by pressing the
Right KEY (
G
) .
[42PX3D-UE: Z42PX3D]
1) Adjust the Hight Light using G Gain/R Gain(Cool).
1) Adjust the Hight Light using G Gain/R Gain(Cool).
(B Gain: 192, R-Cut/G-Cut/B-Cut: 65/64/66 Fix.)
2) Adjust the Hight Light using G Gain/B Gain(Medium).
(R Gain: 192, R-Cut/G-Cut/B-Cut: 63/64/65 Fix.)
3) Adjust the Hight Light using G Gain/B Gain(Warm).
(R Gain: 192, R-Cut/G-Cut/B-Cut: 64/64/69 Fix.)
[50PC3D-UE]
1) Adjust the Hight Light using G Gain/B Gain(Cool).
1) Adjust the Hight Light using G Gain/B Gain(Cool).
(R Gain: 192, R-Cut/G-Cut/B-Cut: 63/61/69 Fix.)
2) Adjust the Hight Light using G Gain/B Gain(Medium).
(R Gain: 192, R-Cut/G-Cut/B-Cut: 64/61/70 Fix.)
3) Adjust the Hight Light using G Gain/B Gain(Warm).
(R Gain: 192, R-Cut/G-Cut/B-Cut: 61/61/70 Fix.)
(6) Adjust using Volume +/- KEY.
(7) After adjustment is complete, exit the adjustment mode by
(7) After adjustment is complete, exit the adjustment mode by
pressing the ENTER(
V
) KEY => ADJ KEY.
High Level: 216gray
[Cool]
X; 0.278±0.002 Y; 0.279±0.002
Color temperature: 11000°K±1500°K
dUV: -3dUV
X; 0.278±0.002 Y; 0.279±0.002
Color temperature: 11000°K±1500°K
dUV: -3dUV
[Medium]
X; 0.287±0.002 Y; 0.289±0.002
Color temperature: 9300°K±1500°K
dUV: -3dUV
X; 0.287±0.002 Y; 0.289±0.002
Color temperature: 9300°K±1500°K
dUV: -3dUV
[Warm]
X; 0.315±0.002 Y; 0.316±0.002
Color temperature: 6500°K±1500°K
dUV: -3dUV
X; 0.315±0.002 Y; 0.316±0.002
Color temperature: 6500°K±1500°K
dUV: -3dUV
R Gain
G Gain
B Gain
R Cut
G Cut
B Cut
Jg
Jh
Ji
Cool
Ja
Jb
Jc
Mid
RS-232C COMMAND
[CMD ID DATA]
CENTER
(DEFAULT)(Decimal)
Jd
Je
Jf
00
00
00
ff
ff
ff
7f
7f
7f
Warm
Min
Max
(Deci
mal)
c0
a8
b4
3f
3d
45
Cool
c0
a6
9d
40
3d
46
Mid
c0
85
58
3d
3d
46
Warm
Click on the first or last page to see other 50PC3DB-UL (CHASSIS:PA-63E) service manuals if exist.