Read LG 50PB4RT-TB (CHASSIS:PP7BA) Service Manual online
- 7 -
5. POWER PCB Assy Voltage
Adjustments
(Va, Vs Voltage adjustments)
5-1. Test Equipment :
D.M.M. 1EA
5-2.Connection Diagram for Measuring
: refer to Fig.2
5-3. Adjustment Method
(1) Va Adjustment
1) After receiving 100% Full White Pattern, HEAT RUN.
2) Connect + terminal of D.M.M to Va pin of P812, connect
2) Connect + terminal of D.M.M to Va pin of P812, connect
- terminal to GND pin of P812.
3) After turning VR501, voltage of D.M.M adjustment as
same as Va voltage which on label of panel right/top.
(Deviation; ±0.5V)
(Deviation; ±0.5V)
(2) Vs Adjustment
1) Connect + terminal of D.M.M to Vs pin of P812, connect
– terminal to GND pin of P812.
2) After turning VR401, voltage of D.M.M adjustment as
same as Va voltage which on label of panel right/top.
(Deviation; ±0.5V)
(Deviation; ±0.5V)
6. ADC Calibration
* Press the FRONT-AV Key on R/C for converting input mode.
(Change RS-232 Host : pc, BaudRate : 115200bps)
7. EDID
7-1. EDID Data
Each PCB assembly must be checked by check JIG set.
(Because power PCB Assembly damages to PDP Module,
especially be careful)
(Because power PCB Assembly damages to PDP Module,
especially be careful)
* Use the proper signal cable for EDID Download
- Analog EDID : Pin3 exists
- Digital EDID : Pin3 exists
- Digital EDID : Pin3 exists
* Never connect HDMI & DVI-D & DVI-A Cable at the same time.
* Use the proper cables below for EDID Writing
* HDMI 1 and HDMI2 is different each other. So you have to
* Use the proper cables below for EDID Writing
* HDMI 1 and HDMI2 is different each other. So you have to
Download different EDIT File.
(Fig.2) Connection diagram of power adjustment for measuring
For Analog EDID
D-sub to DVI-I
DVI-D to DVI-D
For Digital EDID
For HDMI EDID
DVI-D to HDMI or HDMI to HDMI
1
2
3
Manufacturer
Version
Revision
GSM
Digital : 1
Digital : 3
1E6D
01
03
Condition
Item
No
Hex Data
MSPG925FA
Component
RGB-PC
RF/AV/S-VIDEO
ADC
Model : 60
(1024*768 60Hz)
Pattern : 65
*100% Color Bar
Model:217(720P)
Pattern : 65
*100% Color Bar
PAL
INPUT
AV1 - TB
SELECT AV3 - ZF
Model : 202
(PAL-BGDHI)
Pattern : 65
*100% Color Bar
- System control RS-232 Host should be “PC“ for adjustment.
Click on the first or last page to see other 50PB4RT-TB (CHASSIS:PP7BA) service manuals if exist.