47LX9500-UA (CHASSIS:LA02R) - LG TV Service Manual (repair manual). Page 11

- 11 -

This spec sheet is applied to LA02R Chassis applied LCD TV
all models manufactured in TV factory  

2.1   Because this is not a hot chassis, it is not necessary

to use an isolation transformer. However, the use of
isolation transformer will help protect test instrument.  

2.2   Adjustment must be done in the correct order.  
2.3  The adjustment must be performed in the

circumstance of  25±5°C of temperature and 65±10%
of relative humidity   

2.4   The input voltage of the receiver must keep

100~240V, 50/60Hz.  

2.5    The receiver must be operated for about 5 minutes

prior to the adjustment when module is in the
circumstance of over 15. In case of keeping module
is in the circumstance of 0°C, it should be placed in
the circumstance of above 15°C for 2 hours  In case
of keeping module is in the circumstance of below -
20°C, it should be placed in the circumstance of
above 15°C for  3 hours.  

Caution) When still image is displayed for a period of 20

minutes or longer (especially where W/B scale is
strong. Digital pattern 13ch and/or Cross hatch
pattern 09ch), there can some afterimage in the
black level area. 

• Adjust  480i Comp1  

Remark) Above adjustment items can be also performed in

Final Assembly if needed. Adjustment items in
both PCBA and final assembly stages can be
checked by using the INSTART Menu
1.ADJUST CHECK. 

Component 1080p and RGB-PC Adjust will be
calculated by 480i adjust value.

•EDID/DDC download
•White Balance adjustment 
•RS-232C functionality check 
•Factory Option setting per destination 
•Ship-out mode setting (In-Stop) 

• Ship-out mode 
• Tool option menu  
• USB Download(S/W Update, Option, Service only)  

(1) Overview

ADC adjustment is needed to find the optimum black level
and gain in Analog-to-Digital device and to compensate
RGB deviation. 

(2) Equipment & Condition

1) Jig (RS-232C protocol)
2) MSPG-925 Series Pattern Generator(MSPG-925FA) 

- Resolution : 480i Comp1 (MSPG-925FA: model-209,

pattern-65)  

- Resolution : 1080p Comp1 (MSPG-925FA: model-225,

pattern-65) 

- Resolution : 1920x1080 RGB (MSPG-925FA: model-

225, pattern-65) 

- Pattern: Horizontal 100% Color Bar Pattern 
- Pattern level: 0.7±0.1 Vp-p 
- Image 

(3) Adjustment

1) Adjustment method

- Using RS-232, adjust items listed in 3.1 in the other

shown in “4.1.3.3”

2) Adj. protocol

Ref.) ADC Adj. RS232C Protocol_Ver1.0

3) Adj. order

• aa 00 00  [Enter ADC adj. mode] 
• xb 00 40  [Change input source to Component1

(480i/1080p)] 

• ad 00 10  [Adjust 480i/1080p Comp1] 
• ad 00 10  [Adjust 1080p Comp1] 
• xb 00 60  [Change input source to RGB(1920x1080)] 
• ad 00 10  [Adjust 1920x1080 RGB] 
• ad 00 90  End adj.