Read LG 47LC7R (CHASSIS:LP7AB) Service Manual online
4.2.3. 47LC7R-TA HDMI2
• BLOCK1 (128BYTE)
• BLOCK2 (128BYTE)
=> Detail EDID Options are below (a, b, c, d, e).
a. Product ID
b. Serial No: Controlled on production line
c. Month, Year: Controlled on production line:
c. Month, Year: Controlled on production line:
ex) Montly: ‘03’ => ‘03’
Year: ‘2005’ => ‘0F’
d. Model Name/Monitor Name
e. Checksum: Changeable by total EDID data
5. ADC Calibration
5.1 Adjustment of AV
* Required Equipments
• Remote controller for adjustment
• 802F Pattern Generator, Master (MSPG-925FA), etc
• MSPG-925FA Pattern Generator
• 802F Pattern Generator, Master (MSPG-925FA), etc
• MSPG-925FA Pattern Generator
(Which has Video Signal: 100% Color Bar Pattern
shown in Fig. 1)
=> Model: 202 / Pattern: 65 (PAL : CH).
Model: 207 / Pattern : 65 (NTSC-J).
(Fig. 1)
5.1.1 Method of Auto AV Color Balance
1) Press the FRONT-AV KEY on R/C for converting input
1) Press the FRONT-AV KEY on R/C for converting input
mode.
2) Input the Video Signal: 100% Color Bar signal into
AV(MA/TA)
3) Set the PSM to Dynamic mode in the Picture menu
4) Press INSTART key on R/C for adjustment
5) Press the
4) Press INSTART key on R/C for adjustment
5) Press the
(Vol. +) key to operate the set, then it
becomes automatically
6) Auto-RGB OK means the adjustment is completed
5.1.2 Requirement
• This AV color balance adjustment should be performed
• This AV color balance adjustment should be performed
before White Balance Adjustment.
- 11 -
Model Name Product ID
Product ID
Dec.
Hex.
EDID Tabla
47LC7R-TA
40143(A)
40143
9CCF
CF9C
40144(D)
40144
9CD0
D09C
Model
47LC7R 00 00 00 FC 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20
Click on the first or last page to see other 47LC7R (CHASSIS:LP7AB) service manuals if exist.