47LA86XX, 47LA8609, 47LA860V, 47LA860W (CHASSIS:LD34D) - LG TV Service Manual (repair manual). Page 15

Read LG 47LA86XX / 47LA8609 / 47LA860V / 47LA860W (CHASSIS:LD34D) Service Manual online

- 15 -
3.6. Model name & Serial number Download
3.6.1. Model name & Serial number D/L
 Press "Power on" key of service remote control.
(Baud rate : 115200 bps)
 Connect RS-232C Signal to USB Cable to USB.
 Write Serial number by use USB port.
 Must check the serial number at Instart menu.
3.6.2. Method & notice
(1) Serial number D/L is using of scan equipment.
(2)  Setting  of  scan  equipment  operated  by  Manufacturing 
Technology Group.
(3)  Serial number D/L must be conformed when it is produced 
in production line, because serial number D/L is mandatory 
by D-book 4.0.
* Manual Download (Model Name and Serial Number)
If the TV set is downloaded by OTA or service man, sometimes 
model name or serial number is initialized.(Not always)
It  is  impossible  to  download  by  bar  code  scan,  so  It  need 
Manual download.
1) Press the "Instart" key of Adjustment remote control.
2) Go to the menu "7.Model Number D/L" like below photo.
3)  Input the Factory model name(ex 47LM960V-ZB) or Serial 
number like photo.
4)  Check  the  model  name  Instart  menu.  →  Factory  name 
displayed. (ex 47LM960V-ZB)
5)  Check  the  Diagnostics.(DTV  country  only)  →  Buyer 
model displayed. (ex 47LM960V-ZB)
3.7. CI+ Key checking method
* Check the Section 3.2
Check  whether  the  key  was  downloaded  or  not  at  ‘In  Start’ 
menu. (Refer to below).
=> Check the Download to CI+ Key value in LGset.
3.7.1. Check the method of CI+ Key value
(1) Check the method on Instart menu
(2) Check the method of RS232C Command 
1) Into the main ass’y mode(RS232: aa 00 00)
2) Check the key download for transmitted command
    (RS232: ci 00 10)
3) Result value
- Normally status for download : OKx
- Abnormally status for download : NGx
3.7.2. Check the method of CI+ key value(RS232)
1) Into the main ass’y mode(RS232: aa 00 00)
2) Check the mothed of CI+ key by command
    (RS232: ci 00 20)
3) Result value
i 01 OK 1d1852d21c1ed5dcx
3.8. WIFI MAC ADDRESS CHECK
(1) Using RS232 Command
(2) Check the menu on in-start
H-freq(kHz)
V-freq.(Hz)
Transmission
[A][I][][Set ID][][20][Cr]
[O][K][X] or [NG]
CMD 1
CMD 2
Data 0
A
A
0
0
CMD 1
CMD 2
Data 0
C
I
1
0
CMD 1
CMD 2
Data 0
A
A
0
0
CMD 1
CMD 2
Data 0
C
I
2
0
 
CI+ Key Value
Page of 127
Display

Click on the first or last page to see other 47LA86XX / 47LA8609 / 47LA860V / 47LA860W (CHASSIS:LD34D) service manuals if exist.