Read LG 47LA6608 / 47LA660S / 47LA660V / 47LA6678 / 47LA667S / 47LA667V (CHASSIS:LD33B) Service Manual online
- 17 -
4.2.5. Adj. method
(1) Auto adj. method
1) Set TV in adj. mode using POWER ON key.
2) Zero calibrate probe then place it on the center of the
Display.
3) Connect Cable.(RS-232C to USB)
4) Select mode in adj. Program and begin adj.
5) When adj. is complete (OK Sign), check adj. status pre
mode. (Warm, Medium, Cool)
6) Remove probe and RS-232C cable to complete adj.
▪ W/B Adj. must begin as start command “wb 00 00” , and
finish as end command “wb 00 ff”, and Adj. offset if need.
(2) Manual adjustment. method
1) Set TV in Adj. mode using POWER ON.
2) Zero Calibrate the probe of Color Analyzer, then place it
on the center of LCD module within 10 cm of the
surface.
3) Press ADJ key → EZ adjust using adj. R/C → 7. White-
Balance then press the cursor to the right(key ►).
(When right key(►) is pressed 204 Gray internal pattern
will be displayed)
4) One of R Gain / G Gain / B Gain should be fixed at 192,
and the rest will be lowered to meet the desired value.
5) Adjustment is performed in COOL, MEDIUM, WARM 3
modes of color temperature.
▪ If internal pattern is not available, use RF input. In EZ
Adj. menu 7.White Balance, you can select one of 2
Test-pattern: ON, OFF. Default is inner(ON). By selecting
OFF, you can adjust using RF signal in 204 Gray pattern.
▪ Adjustment condition and cautionary items
1) Lighting condition in surrounding area
Surrounding lighting should be lower 10 lux. Try to
isolate adj. area into dark surrounding.
2) Probe location
: Color Analyzer(CA-210) probe should be within 10 cm
and perpendicular of the module surface (80° ~ 100°)
3) Aging time
- After Aging Start, Keep the Power ON status during 5
Minutes.
- In case of LCD, Back-light on should be checked
using no signal or Full-white pattern.
4.2.6. Reference (White balance Adj. coordinate and
color temperature)
▪ Luminance : 204 Gray
▪ Standard color coordinate and temperature using CS-1000
(over 26 inch)
▪ Standard color coordinate and temperature using CA-210(CH 14)
4.2.7. ALELF & EDGE LED White balance table
- EDGE LED module change color coordinate because of
aging time.
- Apply under the color coordinate table, for compensated
aging time.
* Normal Line
[LN5xxx, LA6xxx, LA7xxx, LA8xxx]
*Aging Chamber
[LN5xxx, LA6xxx, LA7xxx, LA8xxx]
Mode
Coordinate
Temp
∆uv
x
y
Cool
0.269
0.273
13000 K
0.0000
Medium
0.285
0.293
9300 K
0.0000
Warm
0.313
0.329
6500 K
0.0000
Mode
Coordinate
Temp
∆uv
x
y
Cool
0.269 ± 0.002
0.273 ± 0.002 13000 K 0.0000
Medium 0.285 ± 0.002
0.293 ± 0.002 9300 K 0.0000
Warm
0.313 ± 0.002
0.329 ± 0.002
6500K 0.0000
NC4.0
Aging
time
(Min)
Cool
Medium
Warm
X
y
x
y
x
y
271
270
286
289
313
329
1
0-2
283
287
298
306
322
342
2
3-5
282
285
297
304
321
340
3
6-9
281
284
296
303
320
339
4
10-19
279
281
294
300
318
336
5
20-35
277
277
292
296
316
332
6
36-49
275
274
290
293
314
329
7
50-79
273
272
288
291
312
327
8
80-119
272
271
287
290
311
326
9
Over 120
271
270
286
289
310
325
NC4.0
Aging
time
(Min)
Cool
Medium
Warm
X
y
x
y
x
y
271
270
286
289
313
329
1
0-5
282
285
297
304
321
340
2
6-10
278
280
293
299
317
335
3
11-20
275
275
290
294
314
330
4
21-30
272
272
287
291
311
327
5
31-40
269
269
284
288
308
324
6
41-50
268
267
283
286
307
322
7
51-80
267
266
282
285
306
321
8
81-119
266
264
281
283
305
319
9
Over 120
265
263
280
282
304
318
Click on the first or last page to see other 47LA6608 / 47LA660S / 47LA660V / 47LA6678 / 47LA667S / 47LA667V (CHASSIS:LD33B) service manuals if exist.