42PM1M-UC (CHASSIS:RF-052C) - LG TV Service Manual (repair manual). Page 9

Read LG 42PM1M-UC (CHASSIS:RF-052C) Service Manual online

- 9 -
ADJUSTMENT INSTRUCTIONS
4. POWER PCB Assy Voltage
Adjustments 
(Va, Vs Voltage Adjustments)
4-1. Test Equipment :
D.M.M. 1EA
4-2.Connection Diagram for Measuring
Refer to Fig. 4
4-3. Adjustment Method for 
P/No 3501V00221A B/D
(1) Va Adjustment
1) After receiving 100% Full White Pattern, HEAT RUN.
2) Connect + terminal of D.M.M to Va pin of P805, connect
- terminal to GND pin of P805.
3) After turning RV601, voltage of D.M.M adjustment as
same as Va voltage which on label of panel right/top.
(Deviation; ±0.5V)
(2) Vs Adjustment
1) Connect + terminal of D.M.M to Vs pin of P805, connect
– terminal to GND pin of P805.
2) After turning RV401, voltage of D.M.M adjustment as
same as Va voltage which on label of panel right/top.
(Deviation; ±0.5V)
5. EDID (The Extended Display
Identification Data)/ DDC (Display
Data Channel) Download
5-1. Required Test Equipment
(1) Adjusting PC with S/W for writing EDID Data.(S/W : EDID
TESTER Ver.2.5)
(2) A Jig for EDID Download
(3) Cable : Serial(9 Pin or USB) to D-sub 15 Pin cable, D-sub
15 Pin cable, DVI to HDMI cable
5-2. Setting of Device
5-3. Preparation for Adjustment
(1) As above Fig. 5, Connect the Set, EDID Download Jig, PC
& Cable.
(2) Turn on the PC & EDID Download Jig. And Execute the
S/W : EDID TESTER Ver,2.5
(3) Set up S/W option
Repeat Number : 5
Device Address : A0
PageByte : 8
4) Power on the Set
5-4. Sequence of Adjustment
(1) DDC data of Analog-RGB
1) Init the data
Each PCB assembly must be checked by check JIG set.
(Because power PCB Assembly damages to PDP Module,
especially be careful)
Va ADJ
RV601
P806
P805
P807
Va
GND
NC
VS
DMM
+
-
P804
P801
P802
Vs ADJ
RV401
P803
(Fig. 4)  Connection Diagram of Power Adjustment for Measuring
(Fig. 5)  Connection Diagram of DDC Download

Display

Click on the first or last page to see other 42PM1M-UC (CHASSIS:RF-052C) service manuals if exist.

Random: