Read LG 42PJ360R-ZA / 42PJ361R-ZC / 42PJ363R-ZB (CHASSIS:PP01B) Service Manual online
- 14 -
* Auto-control interface and directions
(1) Adjust in the place where the influx of light like floodlight
around is blocked. (Illumination is less than 10ux).
(2) Measure and adjust after sticking the Color Analyzer
(CA-100+, CA210 ) to the side of the module.
(3) Aging time
After aging start, keep the Power on (no suspension of
power supply) and heat-run over 5 minutes
power supply) and heat-run over 5 minutes
*Above optical characteristics are should be measured by
following condition.
O
DDC Adjustment Command Set
* R/G/B GAIN max value : C0
10. Default Value in Adjustment
mode
10-1. White Balance
(Default values maybe modified the module condition)
10-2. System control condition
1. AC on time on only one after assembled automatically
Measured Mode
Picture Mode
Vivid
Fresh Contrast
Off
Fresh Color
Off
Smart Power Saving
Off
Adjustment
Adjustment
Adjustment
Click on the first or last page to see other 42PJ360R-ZA / 42PJ361R-ZC / 42PJ363R-ZB (CHASSIS:PP01B) service manuals if exist.