Read LG 42PG30TR-MA (CHASSIS:PP83A) Service Manual online
- 5 -
5. EDID
[Caution]
(1) Use the proper signal cable for EDID Download
- Analog EDID : Pin3 exists
- Digital EDID : Pin3 exists
- Digital EDID : Pin3 exists
(2) Never connect HDMI & DVI-D & DVI-A Cable at the same
time.
(3) Use the proper cables below for EDID Writing
(4) HDMI 1 and HDMI2 is different each other. So You have to
(4) HDMI 1 and HDMI2 is different each other. So You have to
Download different EDID file.
5-1. EDID Data
5-2. Data
(1) ANALOG(256 Bytes )
O
BLOCK1 (128BYTE)
(2) HDMI(256 Bytes )
O
BLOCK1 (128BYTE)
O
BLOCK2 (128BYTE)
[Comment]
(1) For HDMI2 : BLOCK1 is same but BLOCK2 is different
(1) For HDMI2 : BLOCK1 is same but BLOCK2 is different
Vendor Specific 1F :
- HDMI 1 : 10
- HDMI 2 : 20
- HDMI 3 : 30
- HDMI 1 : 10
- HDMI 2 : 20
- HDMI 3 : 30
(2) Product ID :
(3) Check Sum can change as Product ID, Week, Year.
6. ADC Calibration
Caution: System control RS-232 Host should be “PC” for
adjustment.
Press the FRONT-AV KEY on R/C for converting input mode.
(change RS-232 Host : pc, BaudRate : 115200bps)
(change RS-232 Host : pc, BaudRate : 115200bps)
6-1. Adjustment of RF/AV/S-VIDEO
(1) Required Equipments
1) Remote controller for adjustment
2) 802F Pattern Generator, Master (MSPG-925FA), etc.
3) MSPG-925FA Pattern Generator
2) 802F Pattern Generator, Master (MSPG-925FA), etc.
3) MSPG-925FA Pattern Generator
(Which has Video Signal: 100% Color Bar Pattern
shown in Fig. 2)
==> Model: 202 / Pattern : 65
shown in Fig. 2)
==> Model: 202 / Pattern : 65
(Fig. 2)
Click on the first or last page to see other 42PG30TR-MA (CHASSIS:PP83A) service manuals if exist.