42PG2HD-UA (CHASSIS:PU84A) - LG TV Service Manual (repair manual). Page 5

- 5 -

1) Convert to PC in Input-source

I2C COMMAND: 0xF4 (SELECT_INPUT) 0x00 0x60
(RGB)
cf. 0x10(TV), 0x20(AV), 0x40(COMPONENT),
0x60(RGB), 0x90(HDMI)

2) Signal equipment displays

Output Voltage  :  700  mVp-p
Impress Resolution XGA (1024 x 768 @ 60Hz) 
Model : 60    in Pattern Generator
Pattern : 65   in Pattern Generator (MSPG-925 SERISE) 
[gray pattern that left & right is black and center is white
signal (Refer below picture)]. 

3) Adjust by commanding AUTO_COLOR_ADJUST(0xF1)

0x00 0x02 instruction.

1) We confirm whether “0xB6(RGB)” address of EEPROM

“0xA2” is “0xAA” or not. 

2) If “0xB6(RGB)” address of EEPROM “0xB2” isn’t “0xAA”,

we adjust once more

3) We can confirm the ADC values from

“0xB0~0xB5(RGB)” addresses in a page “0xA2”

[

Manual ADC process using Service Remocon. After enter

Service Mode by pushing “ADJ” key, execute “ADC Adjust” by
pushing “

G

” key at “0. ADC CALIBRATION “. 

1) Convert to Component in Input-source

I2C COMMAND : 0xF4 (SELECT_INPUT)  0x00  0x40
(COMPONENT)
cf. 0x10(TV), 0x20(AV), 0x40(COMPONENT),
0x60(RGB), 0x90(HDMI)

2) Signal equipment displays

Impress Resolution  480i
MODEL : 209   in Pattern Generator(480i Mode)
PATTERN : 65  in Pattern Generator(MSPG-925 SERISE) 

3) Adjust by commanding AUTO_COLOR_ADJUST(0xF1)

0x00 0x02 instruction

4) Signal equipment displays

Impress Resolution  1080i
MODEL : 223   in Pattern Generator(1080i Mode)
PATTERN : 65  in Pattern Generator(MSPG-925 SERISE)

5) Adjust by commanding AUTO_COLOR_ADJUST(0xF1)

0x00 0x02 instruction

[

Manual ADC process using Service Remocon. After enter

Service Mode by pushing “ADJ” key, execute “ADC Adjust” by
pushing “

G

” key at “0. ADC CALIBRATION”. 

Adjustment pattern (RGB, COMPONENT)