42PC5D-ZB (CHASSIS:PD73A) - LG TV Service Manual (repair manual). Page 7

- 7 -

1) Adjusting PC with S/W for writing EDID Data.(S/W : EDID

TESTER Ver.2.5)

2) A Jig for EDID Download
3) Cable : Serial(9Pin or USB) to D-sub 15Pin cable, D-sub

15Pin cable, DVI to HDMI cable

1) As above Fig. 2, Connect the Set, EDID Download Jig, PC

& Cable.

2) Turn on the PC & EDID Download Jig. And Execute the

S/W : EDID TESTER Ver,2.5.

3) Set up S/W option.

4) Power on the Set.

1) Init the data.

2) Load the EDID data.(Open File).

[Analog file] (for RGB)

[Digital file]  (for HDMI)

3) Set the S/W as below.
4) Push the “Write Data & Verify”button. And confirm “Yes”.
5) If the writing is finished, you will see the “OK” message.
6) If TV has two HDMI, you must download two times for

each HDMI.

1) Analog RGB.

=> Detail EDID Options are below(1, 2, 3, 4, 5)

1. Product ID

2. Serial No :  Controlled on production line
3. Month, Year : Controlled on production line

ex) Week : '03'     =>  '03' 

Year   : '2006' =>  '10'

4. Model Name(Hex): 

5. Checksum  : Changeable by total EDID data

(Fig. 2) Connection Diagram of DDC download

Open File

Open File

Model

Name

XXXX

Product ID

Product ID

EDID table

XXXX

Hex

XX

DEC

XX

XXXXX

Model Name

XXXXX

Hex Data

XXXXX

1

2

3

4

5