Read LG 42PC3DV-UD / 42PC3DVA-UD / 42PC3D-UD / 42PC3DC-UD / 42PC3DH-UD (CHASSIS:PA-51D) Service Manual online
- 11 -
ADJUSTMENT INSTRUCTIONS
6-3. Adjustment
(1) Select Component as the input with 100% Horizontal
Color Bar Pattern(HozTV31Bar) in 720p Mode and select
‘Normal’ on screen.
‘Normal’ on screen.
(2) After receiving signal for at least 1 second, press the ADJ
Key on the Service R/C to enter the ‘Ez - Adjust’ and select
the ‘1. MST9883A-720p Set’.
Pressing the Enter Key to adjust with automatic movement.
the ‘1. MST9883A-720p Set’.
Pressing the Enter Key to adjust with automatic movement.
(3) When the adjustment is over, 'MST9883A Component
Success’ is displayed. If the adjustment has errors,
'MST9883A Configuration Error’ is displayed.
'MST9883A Configuration Error’ is displayed.
(4) After the Component MST9883A adjustment is over,
convert the RGB-DTV Mode and display Pattern.
When the adjustment is over, 'MST9883A RGB_DTV
Success’ is displayed.
When the adjustment is over, 'MST9883A RGB_DTV
Success’ is displayed.
(5) Select Component as the input with 100% Horizontal Color
Bar Pattern(HozTV31Bar) in 480i Mode.
(6) After receiving signal for at least 1 second, press the ADJ
Key on the Service R/C to enter the ‘Ez - Adjust’ and select
the ‘3. MST9883A-480i Set’.
Pressing the Enter Key to adjust with automatic movement.
the ‘3. MST9883A-480i Set’.
Pressing the Enter Key to adjust with automatic movement.
(7) When the adjustment is over, 'MST9883A Component
Success’ is displayed. If the adjustment has errors,
'MST9883A Configuration Error’ is displayed.
'MST9883A Configuration Error’ is displayed.
[
MST9883 480i adjustment is apply the only Component Mode.
(8) Readjust after confirming the case Pattern or adjustment
condition where the adjustment had errors.
(9) After adjustment is complete, exit the adjustment mode by
pressing the ADJ KEY.
7. Adjustment of White Balance
7-1. Required Equipment
(1) Color analyzer (CA-100 or similar product)
(2) Automatic adjustor (with automatic adjustment hour
(2) Automatic adjustor (with automatic adjustment hour
necessity and the RS-232C communication being possible)
(3) Pattern Generator(MSPG-925FA): DVI Output
7-2. Connection Diagram of Equipment
for Measuring
(Automatic Adjustment)
[
[
RS-232C Command
(Automatic Adjustment)
7-3. Adjustment of White Balance
O
Operate the Zero-calibration of the CA-100, then attach
sensor to PDP module surface when you adjust.
O
Manual adjustment is also possible by the following sequence.
(1) Enter ‘Ez - Adjust’ by pressing ADJ KEY on the Service
Remote Control.
(2) Select "8. WHITE PATTERN" using CH +/- Key and HEAT
RUN at least 30 minutes by pressing the ENTER Key.
(3) Receive the Window pattern signal from Digital Pattern
Generator. (AV Input: connect the ‘HDMI’)
(4) After attaching sensor to center of screen, select ‘5. White-
Balance’ of ‘Ez - Adjust’ by pressing the ADJ KEY on the
Service R/C. Then enter adjustment mode by pressing the
Right KEY (
Service R/C. Then enter adjustment mode by pressing the
Right KEY (
G
) .
(5) Adjust the Hight Light using R Gain/G Gain(Cool).
Adjust the Hight Light using G Gain/B Gain(Medium).
Adjust the Hight Light using G Gain/B Gain(Warm).
Adjust the Hight Light using G Gain/B Gain(Warm).
(6) Adjust using Volume +/- KEY.
After adjustment is complete, exit the adjustment mode by
pressing the ADJ KEY.
pressing the ADJ KEY.
High Level: 216gray
[Cool]
X; 0.278±0.002 Y; 0.279±0.002
Color temperature: 11000°K±1000°K
X; 0.278±0.002 Y; 0.279±0.002
Color temperature: 11000°K±1000°K
[Medium]
X; 0.287±0.003 Y; 0.289±0.003
Color temperature: 9300°K±1000°K
X; 0.287±0.003 Y; 0.289±0.003
Color temperature: 9300°K±1000°K
[Warm]
X; 0.315±0.002 Y; 0.316±0.002
Color temperature: 6500°K±1000°K
X; 0.315±0.002 Y; 0.316±0.002
Color temperature: 6500°K±1000°K
R Gain
G Gain
B Gain
R Cut
G Cut
B Cut
Jg
Jh
Ji
Cool
Ja
Jb
Jc
Med
RS-232C COMMAND
CENTER(DEFAULT)
Jd
Je
Jf
00
00
00
ff
ff
ff
7f
7f
7f
Warm
Min
Max
b8
bd
c0
40
40
40
Cool
c0
b8
b1
40
40
40
Med
c0
96
54
40
40
40
Warm
Click on the first or last page to see other 42PC3DV-UD / 42PC3DVA-UD / 42PC3D-UD / 42PC3DC-UD / 42PC3DH-UD (CHASSIS:PA-51D) service manuals if exist.