Read LG 42PB4DT-UA (CHASSIS:PA72A) (serv.man2) Service Manual online
- 7 -
ADJUSTMENT INSTRUCTIONS
(3) When the "Select Device" window appears, select the
PIC18F1220 from "Device" and press OK.
(4) Select "Programmer -> Connect".
When connected with the Micom, the display message on
the Output window appears as below.
the Output window appears as below.
(5) Select "File -> Import", select the Work HEX file and open.
(6) Select "Programmer -> Program".
(7) Download is executed and about 5 seconds later, the
"Programming succeeded" message is displayed on the
Output window and the Download process is ended.
Output window and the Download process is ended.
(8) The execution of process (6) is convenient when using the
short-cut icon.
5. POD Certificate Download
Download the authentication key for decoding when inserting
the cable card
the cable card
5-1. Required Test Equipment
(1) MEMORY JIG
(2) PC
(2) PC
5-2. Preparation for Adjustment
(1) Connect the MEMORY JIG and PC.
(2) Turn on the JIG MAIN POWER SWITCH.
(3) Execute the ‘Certificate Downloader v1.4’.
(2) Turn on the JIG MAIN POWER SWITCH.
(3) Execute the ‘Certificate Downloader v1.4’.
5-3. Adjustment
(1) After open the ‘Certificate Downloader v1.4’, enter
Connection set and set the as same below.
The port settings are determined by each PC's setup.
The port settings are determined by each PC's setup.
Click on the first or last page to see other 42PB4DT-UA (CHASSIS:PA72A) (serv.man2) service manuals if exist.