42LM3400 (CHASSIS:LT21C) - LG TV Service Manual (repair manual). Page 17

Read LG 42LM3400 (CHASSIS:LT21C) Service Manual online

- 17 -
- Analog (RGB) EDID table - FHD
 
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
00 FF FF FF FF FF FF 00 1E 6D 01 00 01 01 01 01
10 01 16 01 03 68 A0 5A 78 0A EE 91 A3 54 4C 99 26
20 0F 50 54 A1 08 00 31 40 45 40 61 40 71 40 81 80
30 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C
40 45 00 A0 5A 00 00 00 1E 66 21 50 B0 51 00 1B 30
50 40 70 36 00 A0 5A 00 00 00 1E 00 00 00 FD 00 3A
60 3E 1E 53 10 00 0A 20 20 20 20 20 20 00 00 00 FC
70 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20 00 5C
CheckSum : 5C
- Analog (RGB) EDID table - HD
 
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
00 FF FF FF FF FF FF 00 1E 6D 01 00 01 01 01 01
10 01 15 01 03 68 10 09 78 0A EE 91 A3 54 4C 99 26
20 0F 50 54 A1 08 00 81 C0 61 40 45 40 31 40 01 01
30 01 01 01 01 01 01 1B 21 50 A0 51 00 1E 30 48 88
40 35 00 A0 5A 00 00 00 1C 01 1D 00 72 51 D0 1E 20
50 6E 28 55 00 A0 5A 00 00 00 1E 00 00 00 FD 00 3A
60 3E 1F 46 10 00 0A 20 20 20 20 20 20 00 00 00 FC
70 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20 00 CD
=> Detail EDID Options are below
HD( 2D TV)
FHD(2D TV) 
_10bit
FHD(2D TV) 
_8bit
HD (3D TV)
FHD (3D TV)
32LS3500-DA
47LS4600-DA
32LS5600-DA
32LM3400-DA 47LM5800-DB
32LS3400-DA
42LS4600-DA
42LM5800-DB
32CS460-DA
32LS4600-DA
32LM5800-DB
42LS3400-DA
55LM4600-DB
42CS560-DA
47LM4600-DB
32CS560-DA
42LM3400-DA
42CS460-DA
Support Deep 
color
Non-Support 
Deep color
ASCII Code
4.5. Outgoing condition Configuration
■  When  pressing  IN-STOP  key  by  SVC  remocon,  Red  LED 
are blinked alternatively. And then automatically turn off.
        (Must not AC power OFF during blinking)
4.6 GND & Hi-pot test
Confirm  whether  is  normal  or  not  when  between  power 
board's  ac  block  and  GND  is  impacted  on  1.5kV(dc)  or 
2.2kV(dc) for one second.
■ GND TEST =  POWER  CORD  GND  and  SIGNAL  CABLE 
GND
■ Hi-pot TEST = POWER CORD GND and LIVE&NUETRAL
■ Test Process
(1)  Check the POWER CABLE and SIGNAL CABLE insertion 
condition.
(2) Connect the AV JACK Tester
(3) Controller(GWS103-4) on
(4) GND TEST(Auto)
      - If Test is failed, Buzzer operate
      - If Test is passed, execute next process(HI-pot test)
      - Remove A/V CORD from A/V JACK BOX
(5) HI-POT test(Auto)
      - If Test is failed, Buzzer operate
      -  If  Test  is  passed,  GOOD  Lamp  on  and  move  to  next 
process automatically.
Page of 45
Display

Click on the first or last page to see other 42LM3400 (CHASSIS:LT21C) service manuals if exist.