42LB5RT (CHASSIS:LP7BA) - LG TV Service Manual (repair manual). Page 12

- 12 -

7.2  Adjustment of Component.

* Required Equipments
- Remote controller for adjustment
- 802F Pattern Generator, Master (MSPG-925FA), etc
- MSPG-925FA Pattern Generator 

(Which has 720p@60Hz YPbPr signal : 100% Color

Bar Pattern shown in Fig. 3 )

=> Model: 217 / Pattern: 65
- It is very import to use correct adjustment pattern like

Fig.3. 

a. Within the pattern, color sequence should be aligned
: White-Yellow-Cyan-Green-Magenta-Red-BLUE-

BLACK

(If color sequence is reversed (Black -> …-> White),

reverse the pattern with REV key, when using Master
pattern generator like MSPG-925)

b. If Minimum Black Level and/or Maximum White Level

is not correct, Do select 100% Color Bar Pattern.

(Fig. 3)

7.2.1 Method of Auto Component Color Balance

1) Input the Component 720p 100% Color Bar(MSPG-

925FA model:217, pattern:65) signal into Component.

(MH : component 1 )

2) Set the PSM to Dynamic mode in the Picture menu
3) Press the INSTART key on R/C for adjustment
4) Press the 

(Vol. +) key to operate the set, then it

becomes automatically

5) Auto-RGB OK means the adjustment is completed

7.3  Adjustment of RGB

* Required Equipments
- Remote controller for adjustment
- 802F Pattern Generator, Master (MSPG-925FA), etc
- MSPG-925FA Pattern Generator 
(Which has XGA [1024*768] 60Hz PC Format output

signal : 100% Color Bar Pattern shown in Fig. 4 )

- It is very import to use correct adjustment pattern like

Fig. 4.  

a. Within the pattern, color sequence should be aligned

: White-Yellow-Cyan-Green-Magenta-Red-BLUE-

BLACK

(If color sequence is reversed (Black -> …-> White),

reverse the pattern with REV key, when using Master
pattern generator like MSPG-925)

b. If Minimum Black Level and/or Maximum White Level

is not correct, Do select 100% Color Bar Pattern

(Fig. 4)

7.3.1 Method of Auto RGB Color Balance

1)  Input the PC 1024x768 @ 60Hz with 100% color bar

pattern like Fig.4. into RGB.

(Ex. MSPG-925FA, model:60, pattern:65)

2) Set the PSM to Dynamic mode in Picture menu
3) Press the INSTART key on R/C for adjustment
4) Press the 

(Vol. +) key operate To set , then it

becomes automatically

5) Auto-RGB OK means adjustment is completed