42LB2R (CHASSIS:LP62E) - LG TV Service Manual (repair manual). Page 11

Read LG 42LB2R (CHASSIS:LP62E) Service Manual online

- 11 -
ADJUSTMENT INSTRUCTION
1. Application Range
This spec. sheet is applied to all of the LP62E chassis(H3-
High) manufactured at LG TV Plant all over the world.  
2. Specification
1) Because this is not a hot chassis, it is not necessary to use
an isolation transformer. However, the use of isolation
transformer will help to protect test instruments.
2) Adjustment must be done in the correct sequence.
3) The adjustment must be performed at 25±5°C temperature
and 65±10% relative humidity if there is no specified
designation.
4) The input voltage of the receiver must be kept between
100-220V, 50/60Hz.
5) Before adjustment, execute Heat-Run for 30 minutes at RF
no signal
3. Adjustment items 
3.1. PCB assembly adjustment items
O
Channel memory
- Download the channel data from BOM to EEPROM by
using LGIDS.
O
Option adjustment following BOM 
- Tool Option1
- Tool Option2
- Area Option
1) Push the ADJ key in the Adjust Remote control.
2) Input the Option Number that was specified in the BOM,
into the Shipping area.
3) Select "Tool Option1/ Tool Option2/ Area Option" by using
D
/
E
(CH+/-) key, and press the number key(0~9)
consecutively
ex) If the value of Tool Option1 is 7, input the data using
number key "7" (Fig. 1)
3.2. SET assembly adjustment items
O
Auto AV(ZH-AV3, TH-AV1) Color Balance
O
Aging (by Power on key)
O
Adjustment of White Balance
O
Auto Component Color Balance adjustment
- Standard equipment : MSPG925FA
O
Auto RGB Color Balance adjustment
- Standard equipment : MSPG925FA
4. EDID
Δ Caution
* Use the proper signal cable for EDID Download
- Analog EDID : Pin3 exists
- Digital EDID  : Pin3 exists
* Caution : - Never connect HDMI & DVI-D & DVI-A Cable at
the same time.
- Use the proper cables below for EDID Writing.
4.1. EDID Data
(1) ANALOG(256 Bytes )
O
BLOCK1 (128BYTE)
(2) HDMI(256 Bytes )
O
BLOCK1 (128BYTE)
O
BLOCK2 (128BYTE)
(Fig. 1)
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 00 FF FF FF FF FF FF FF 1E 6D
10
01 03 01 46 27 78 EA D9 B0 A3 57 49 9C 25
20 11 49 4B A5 6E 80 31 40 01 01 01 01 45 40 01 01
30 61 40 01 01 01 01 1B 21 50 A0 51 00 1E 30 48 88
40 35 00 BC 88 21 00 00 1C 4E 1F 00 80 51 00 1E 30
50 40 80 37 00 BC 88 21 00 00 18 00 00 00 FD 00 38
60 4B 1F 3D 09 00 0A 20 20 20 20 20 20
70
00 99
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 00 FF FF FF FF FF FF FF 1E 6D
10
01 03 80 46 27 78 EA D9 B0 A3 57 49 9C 25
20 11 49 4B A5 6E 80 31 40 01 01 01 01 45 40 01 01
30 61 40 01 01 01 01 1B 21 50 A0 51 00 1E 30 48 88
40 35 00 BC 88 21 00 00 1C 4E 1F 00 80 51 00 1E 30
50 40 80 37 00 BC 88 21 00 00 18
60
00 00 00 FD
70 00 38 4B 1F 3D 09 00 0A 20 20 20 20 20 20 01 14
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 02 03 24 F1 49 85 04 02 01 03 11 12 13 14 23 09
10 07 07 23 09 07 07 23 09 07 07 83 01 00 00 65 03
20 0C 00 10 00 01 1D 00 80 51 D0 1C 20 40 80 35 00
30 BC 88 21 00 00 1E 8C 0A D0 8A 20 E0 2D 10 10 3E
40 96 00 13 8E 21 00 00 18 2A 12 00 10 41 43 17 20
50 28 60 35 00 00 00 32 00 00 1C 01 1D 80 18 71 1C
60 16 20 58 2C 25 00 C4 8E 21 00 00 9E 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6B
For Analog EDID
D-sub to DVI-I
For Digital EDID
DVI-D to DVI-D
For HDMI EDID
DV-D to HDMI or HDMI to HDMI
c
No.
1
2
3
Item
Manufacturer ID
Version
Revision
Data
1E6D
01
03
a
a
b
b
d
d
d
d
LP62E
Cortez Version
x.xx
Panel Used  XX  hr.
Tool Option1
7
Tool Option2
161
Area Option
16
:
:
Page of 44
Display

Click on the first or last page to see other 42LB2R (CHASSIS:LP62E) service manuals if exist.