Read LG 32PC5RVH-MF (CHASSIS:PP78C) Service Manual online
- 19 -
13. HDMI mode
Is only video
normal?
Is only audio
normal?
No
Yes
Download EDID data each port.
Check the TMDS line wave.
(R312~E3273)
1. Check the HDMI receiver’s status register. (0x60, offset 0x66)
- If the value is 0xf or 0x8, it is normal.
2. Check the HDCP register. (0x6, offset 0x32)
- Enable bit 6 : HDCP key loaded
- Enable bit 5 : HDCP decryption active
- Enable bit 4 : HDCP authentication attempted
- Enable bit 5 : HDCP decryption active
- Enable bit 4 : HDCP authentication attempted
Reset TMDS power down/ on register.
- 0x60, offset 0x3f => 0xff
Check the HDMI source.
Change to another source or cable.
Yes
Is the wave
continuous?
Normal video,
Normal audio?
No
Yes
Replace the IC303.
No
1. Check TV input mode.
(HDMI 1 port support HDMI and DVI.
So if you input DVI signal and PC audio from phone
jack, You can hear PC audio.)
So if you input DVI signal and PC audio from phone
jack, You can hear PC audio.)
2. Unplug and plug in the HDMI cable.
(sometimes an ESD surge occurred at HDMI port.)
3. Check the HDMI Mute register. (0x68, offset 0x37)
4. Check the Audio-out channel mute register (0x68,
4. Check the Audio-out channel mute register (0x68,
offset 0x32) is appropriately enabled.
Yes
Click on the first or last page to see other 32PC5RVH-MF (CHASSIS:PP78C) service manuals if exist.