Read LG 32PC5RV-UG (CHASSIS:PP78C) Service Manual online
- 5 -
ADJUSTMENT INSTRUCTIONS
1. Application Range
This spec sheet is applied all of the 32” PDP TV, PP78C
chassis .
chassis .
2. Specification
(1) Because this is not a hot chassis, it is not necessary to use
an isolation transformer. However, the use of isolation
transformer will help protect test instrument..
transformer will help protect test instrument..
(2) Adjustment must be done in the correct order.
(3) The adjustment must be performed in the circumstance of
(3) The adjustment must be performed in the circumstance of
25±5°C of temperature and 65±10% of relative humidity if
there is no specific designation.
there is no specific designation.
(4) The input voltage of the receiver must keep 100~220V,
50/60Hz
(5) Before adjustment, execute Heat-Run for 30 minutes.
3. Download Program Installation
(1) Extract a Zip file
(2) Visaul I2C & LPT Driver Installation
(3) Verification (Start>Programs>Micronas>Visual I2C or
LptDrv)
(4) LPT delay setting (File>Preference>LPT preferences..)
(5) Exchange the bootloader.bat file
Install the LPT Driver
Install the Visual I2C
Install the Visual I2C
G
LPT SETTING
- Delay -> 1
- Timeout -> 500 ms
- Timeout -> 500 ms
Click on the first or last page to see other 32PC5RV-UG (CHASSIS:PP78C) service manuals if exist.