Read LG 32LV3700-DA (CHASSIS:LT12B) Service Manual online
- 24 -
5.4. LAN Inspection
1) LAN Port connection with PCB
2) Network setting at MENU Mode of TV
3) Setting automatic IP
4) Setting state confirmation
5) If automatic setting is finished, you confirm IP and MAC
2) Network setting at MENU Mode of TV
3) Setting automatic IP
4) Setting state confirmation
5) If automatic setting is finished, you confirm IP and MAC
Address
5.5. WIDEVINE Key Inspection
1) Confirm Key input Data at the “IN START” MENU Mode
5.6. Model name & Serial number D/L
5.6.1. Notice
1) Serial number D/L is using of scan equipment.
2) Setting of scan equipment operated by Manufacturing
1) Serial number D/L is using of scan equipment.
2) Setting of scan equipment operated by Manufacturing
Technology Group.
3) Serial number D/L must be conformed when it is produced
in production line, because serial number D/L is mandatory
by D-book 4.0
by D-book 4.0
4) Check the model name In-start menu Factory name
displayed (ex 42LV5500-DD)
5) Check the Diagnostics (DTV country only)-> Buyer model
displayed (ex 42LV5500-DD)
displayed (ex 42LV5500-DD)
5) Check the Diagnostics (DTV country only)-> Buyer model
displayed (ex 42LV5500-DD)
5.6.2. Method : Auto
1) Press “Power on” key of service remocon.(Baud rate :
1) Press “Power on” key of service remocon.(Baud rate :
115200 bps)
2) Connect RS232 Signal Cable to RS-232 Jack
3) Write Serial number by use RS-232.
4) Must check the serial number at Instart menu.
3) Write Serial number by use RS-232.
4) Must check the serial number at Instart menu.
5.6.3. Method : Manual
* If the TV set is downloaded By OTA or Service man,
* If the TV set is downloaded By OTA or Service man,
Sometimes model name or serial number is initialized.
(Not always) It is impossible to download by bar code scan, so
It need Manual download.
1) Press the ‘instart’ key of ADJ remote controller.
2) Go to the menu ‘6.Model Number D/L’ like below photo.
3) Input the Factory model name or Serial number like photo.
It need Manual download.
1) Press the ‘instart’ key of ADJ remote controller.
2) Go to the menu ‘6.Model Number D/L’ like below photo.
3) Input the Factory model name or Serial number like photo.
5.7. Wi-Fi MAC ADDRESS CHECK
1) Using RS232
2) Check the menu on in-start
Command Set
ACK
transmission [A][l][][Set ID][][20][Cr]
[O][K][x] or [N][G]
Click on the first or last page to see other 32LV3700-DA (CHASSIS:LT12B) service manuals if exist.