32LG60UD (CHASSIS:LB81B) - LG TV Service Manual (repair manual). Page 10

- 10 -

1) Push "IN-START" key in service remote controller 
2) Select "MODEL SELECT" and Push “OK” button.
3) Go To “INCH” and choice proper inch.
4) TV power turn off and on.
5) Completed selecting Tool option

1) Auto RGB Gain/Offset Adjustment

- Convert to PC in Input-source
- Signal equipment displays

Output Voltage : 700 mVp-p
Impress Resolution XGA (1024 x 768 @ 60Hz) 
Model : 60    in Pattern Generator
Pattern : 65   in Pattern Generator (MSPG-925 Series,
MPSG-1025D) - 7 color bar.
[gray pattern that left & right is black and center is
white signal(Refer below picture)]

- Adjust by commanding AUTO_COLOR_ADJUST.

2) Confirmation

- We confirm whether “0xAA (RGB)” address of

EEPROM “0xA2” is “0xAA” or not. 

- If “0xAA (RGB)” address of EEPROM “0xA2” isn’t

“0xAA”, we adjust once more

- We can confirm the ADC values from “0xA4~0XA9

(RGB)” addresses in a page “0xA2”

* Manual ADC process using Service Remocon. After

enter Service Mode by pushing “ADJ” key,
execute “ADC Adjust” by pushing “

G

” key at “ADC

CALIBRATION: RGB-PC”.  

1) Component Gain/Offset Adjustment

- Convert to Component in Input-source
- Signal equipment displays

Impress Resolution 480i
MODEL : 209   in Pattern Generator(480i Mode)
Pattern : 65   in Pattern Generator (MSPG-925 Series,
MPSG-1025D) - 7 color bar.

Impress Resolution 1080i
Model : 223   in Pattern Generator(1080i Mode)
Pattern: 65   in Pattern Generator (MSPG-925 Series,
MPSG-1025D) - 7 color bar.

- Adjust by commanding AUTO_COLOR_ADJUST.

2) Confirmation

- We confirm whether “0xB3 (480i)/0xBC (1080i)”

address of EEPROM “0xA2” is “0xAA” or not.

- If “0xB3 (480i)/0xBC(1080i)” address of EEPROM

“0xA2” isn’t “0xAA”, we adjust once more.

- We can confirm the ADC values from “0xAD~0XB2

(480i)/0XB6~BB (1080i)” addresses in a page “0xA2”.

* Manual ADC process using Service Remocon. After

enter Service Mode by pushing “ADJ” key, execute “ADC
Adjust” by pushing “

G

” key at “ADC CALIBRATION :

COMPONENT”.

Impress Resolution 480i

Impress Resolution 1080i

- Check Input and Signal items. (cf. work instructions) 

1) TV
2) AV (SCART1/SCART2/S-VHS/CVBS)
3) COMPONENT (480i)
4) RGB (PC : 1024 x 768 @ 60hz)
5) HDMI
6) PC Audio In 
* Display and Sound check is executed by Remote

controller.

<Fig. 1> Adjustment pattern(PC)