32LA61XX, 32LA6130, 32LA6134, 32LA6136, 32LA613S, 32LA613V, 32LA615V (CHASSIS:LD31B) - LG TV Service Manual (repair manual). Page 13

Read LG 32LA61XX / 32LA6130 / 32LA6134 / 32LA6136 / 32LA613S / 32LA613V / 32LA615V (CHASSIS:LD31B) Service Manual online

- 13 -
How to adjust
1) In case G gain more than 172
    Adjust R Gain and B Gain less than 192 
2) if the G gain value be adjusted down to 172
     G  gain  increase  to  172  and  R  gain  /  B  gain  increase 
same as G gain increases.
3)  if R Gain / B Gain is more than 255 , the G gain adjust 
to less than 172.
* CASE Medium / Warm
First  adjust  the  coordinate  far  away  from  the  target 
value(x, y).
1) x, y > target
i) Decrease the R, G. 
2) x, y < target
i) First decrease the B gain, 
ii) Decrease the one of the others.
3) x > target, y < target
i) First decrease B, so make y a little more than the target.
ii) Adjust x value by decreasing the R
4) x < target, y > target
i) First decrease B, so make x a little more than the target.
ii) Adjust x value by decreasing the G
*  After you finished all adjustments, Press "In-start" key and 
compare Tool option and Area option value with its BOM, if 
it  is  correctly  same  then  unplug  the AC  cable.  If  it  is  not 
same, then correct it same with BOM and unplug AC cable.
For correct it to the model's module from factory Jig model.
*  Push  the  "IN  STOP"  key  after  completing  the  function 
inspection. And  Mechanical  Power  Switch  must  be  set 
“ON”.
4.2. 3D function test
(Pattern Generator MSHG-600, MSPG-6100[Support HDMI1.4])
* HDMI mode NO. 872 , pattern No.83
(1)  Please input 3D test pattern like below. 
(2)  When 3D OSD appear automatically , then select OK key.
(3)  Don't wear a 3D Glasses, Check the picture like below.
4.3. IR emitter inspection
(1) Start 3D pattern inspection.
(2)  If IR emitter signal is correctly received to IR receiver, the 
lamp of IR tester turns on.
4.4. MHL Test
(1) Turn on TV
(2) Select HDMI2 mode using input Menu.
(3)  Set  MHL  Zig(M1S0D3617)  using  MHL  input,  output  and 
power cord.
(4) Connect HDMI cable between MHL Zig and HDMI4 port.
Result)  If,  The  LED  light  is  green  and  the  Module  shows 
normal stream → OK, Else → NG
Page of 76
Display

Click on the first or last page to see other 32LA61XX / 32LA6130 / 32LA6134 / 32LA6136 / 32LA613S / 32LA613V / 32LA615V (CHASSIS:LD31B) service manuals if exist.