Read LG 26HIZ10 (CHASSIS:ML-041E) Service Manual online
- 11 -
3.4.1 Black level(sub-bright adjustment)
Apply Gray-Level Gray-Level (Model : 210, pattern : 59)
signal by using Pattern Generator(MSPG-925FS).
Check the luminance (32 LPL : 7.2 cd/m^2, 30 AUO :5.0
cd/m^2, 27 CMO : 5.2 cd/m^2, 26 LPL : 7.5 cd/m^2, 26
AUO : 7.5 cd/m^2, 23 LPL : 6.3 cd/m^2, +-0.5cd/m^2) by
using CA-110 equipment
signal by using Pattern Generator(MSPG-925FS).
Check the luminance (32 LPL : 7.2 cd/m^2, 30 AUO :5.0
cd/m^2, 27 CMO : 5.2 cd/m^2, 26 LPL : 7.5 cd/m^2, 26
AUO : 7.5 cd/m^2, 23 LPL : 6.3 cd/m^2, +-0.5cd/m^2) by
using CA-110 equipment
If color-coordinates is not in Spec, adjust the luminance
spec by adjusting Sub-bright.
spec by adjusting Sub-bright.
3.4.2 Low Gray Adjustment
Apply Gray-Level Gray-Level (Model : 210, pattern : 59)
signal by using Pattern Generator(MSPG-925FS)
Check weather color-coordinates(x : 0.280 , y : 0.280,
±0.005)is operated by using CA-110 equipment
signal by using Pattern Generator(MSPG-925FS)
Check weather color-coordinates(x : 0.280 , y : 0.280,
±0.005)is operated by using CA-110 equipment
If color-coordinates is not in Spec, adjust color-
coordinates ( x : 0.280 , y : 0.280, ±0.005) by adjusting
Red Offset, Blue Offset
All adjustment takes color-coordinates with based on G,
changing R and B. If it is not adjusted, adjust with fixed
B, changing G and R.
coordinates ( x : 0.280 , y : 0.280, ±0.005) by adjusting
Red Offset, Blue Offset
All adjustment takes color-coordinates with based on G,
changing R and B. If it is not adjusted, adjust with fixed
B, changing G and R.
3.4.3 White Balance Adjustment
Apply 95% White (Model : 210, pattern : 47, luminance
spec : 350cd/m^2 over )signal by using Patten
Generator(MSPG925FS)
Check whether color-coordinates(x : 0.283, y : 0.298,
±0.005)is operated by using CA-110 equipment
If color-coordinates is not in Spec, adjust color-
coordinates ( x : 0.283, y : 0.298, ±0.005) by adjusting
Red Gain, Blue Gain
All adjustment takes color-coordinates with based on G,
changing R and B. If it is not adjusted, adjust with fixed B,
changing G and R.
spec : 350cd/m^2 over )signal by using Patten
Generator(MSPG925FS)
Check whether color-coordinates(x : 0.283, y : 0.298,
±0.005)is operated by using CA-110 equipment
If color-coordinates is not in Spec, adjust color-
coordinates ( x : 0.283, y : 0.298, ±0.005) by adjusting
Red Gain, Blue Gain
All adjustment takes color-coordinates with based on G,
changing R and B. If it is not adjusted, adjust with fixed B,
changing G and R.
4. EDID(The Extended Display Identification Data) SETTING
Connect D-Sub to DVI-I Cable to DVI-I Jack.
Input analog signal and check pc video in the screen.
After appearing the pc video, write Analog EDID data.
Connect DVI D Cable to DVI Jack.
Input digital signal and check pc video in the screen.
After appearing the pc video, write digital EDID data.
Click on the first or last page to see other 26HIZ10 (CHASSIS:ML-041E) service manuals if exist.