Read LG 22LT560C (CHASSIS:LA2AA) Service Manual online
- 11 -
5.2. Option selection per country
5.2.1. Overview
America due to rating
(2) Applied model: LA2AC Chassis is applied in USA
5.2.2. Method
(1) Press ADJ key on the Adj. R/C, and then select Country
Group Menu
(2) Depending on destination, select KR or US, then on the
lower Country option, select US, CA, MX.
Selection is done using +, - KEY
5.2.3. Tool Option inspection
▪ Press Adj. key on the Adj. R/C, then select Tool option.
Model
Module Tool 1 Tool 2 Tool 3 Tool 4 Tool 5
COM-
MERCIAL
OPTION
22LT560C-UA
CMI
18433
273
11537 21420
36
1034
26LT560C-UA
LGD
16387
273
10513 21420
36
1034
32LT560C-UA
AUO
20484 2321 11537 21420
52
1035
LGD
16388 2321 11537 21420
36
1035
37LT560C-UA
LGD
16389 2321 11537 21420
36
1035
42LT560C-UA
LGD
16390 2321 11537 21420 2052
1035
32LT560E-UA
AUO
20484 2321 11537 21420
542
1291
LGD
16388 2321 11537 21420
38
1291
37LT560E-UA
LGD
16389 2321 11537 21420
38
1291
42LT560E-UA
LGD
16390 2321 11537 21420 2054
1291
47LT560E-UA
LGD
7
2321 10513 21420
6
1291
5.2.4. Ship-out mode check (In-stop)
▪ After final inspection, press In-Stop key of the Adj. R/C and
check that the unit goes to Stand-by mode
6. GND and HI-POT Test
6.1. GND & HI-POT auto-check preparation
(1) Check the POWER CABLE and SIGNAL CABE insertion
condition
6.2. GND & HI-POT auto-check
(1) Pallet moves in the station. (POWER CORD / AV CORD is
tightly inserted)
(2) Connect the AV JACK Tester.
(3) Controller (GWS103-4) on.
(4) GND Test (Auto)
- If Test is failed, Buzzer operates.
- If Test is passed, execute next process (Hi-pot test).
(Remove A/V CORD from A/V JACK BOX)
(5) HI-POT test (Auto)
- If Test is failed, Buzzer operates.
- If Test is passed, GOOD Lamp on and move to next process
automatically.
6.3. Checkpoint
(1) Test voltage
- GND: 1.5KV/min at 100mA
- SIGNAL: 3KV/min at 100mA
(2) TEST time: 1 second
(3) TEST POINT
- GND Test = POWER CORD GND and SIGNAL CABLE GND.
- Hi-pot Test = POWER CORD GND and LIVE & NEUTRAL.
(4) LEAKAGE CURRENT: At 0.5mArms
7. AUDIO output check
7.1. Audio input condition
(1) RF input: Mono, 1KHz sine wave signal, 100% Modulation
(2) CVBS, Component: 1KHz sine wave signal (0.4Vrms)
(3) RGB PC: 1KHz sine wave signal (0.7Vrms)
7.2. Specification
Click on the first or last page to see other 22LT560C (CHASSIS:LA2AA) service manuals if exist.