Read LG 22LS2100 (CHASSIS:LD93Q / LP93Q) Service Manual online
- 6 -
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This spec sheet is applied to the 22” LED Monitor TV used
LD93Q chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
2) Relative Humidity: 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
4. General Specification
4.1. RGB-PC
No.
Item
Specification
Remarks
1
Supported Sync. Type
Separate Sync.(RGB), SOG
2
Operating Frequency
Analog
Horizontal
30 ~ 69 kHz
Vertical
56 ~ 61 Hz
3
Operating Frequency
Analog
Max
1920×1080 @ 60Hz
Recommend 1920×1080 @ 60Hz
4
Input Voltage
Voltage :100 – 240 Vac, 50 or 60 Hz
5
Inrush Current
Cold Start : 50 A, Hot : 120 A
6
Operating Condition
Sync (H/V) Video
LED
Wattage
Power S/W On
On mode
On/On
Active
Off(PTN,PMN)
48(Max)
On/On
Active
27(Typ.)
Sleep mode
Off/On
Off
Blanking
1W
RGB
On/Off
Power S/W Off
Off mode
-
Off
Red (PTN_PMN) 0.5W
Just operate power key and remote
controller power button.
7
MTBF
30,000 HRS with 90 % Confidence level
Lamp Life : 30,000 Hours(min)
8
Using Altitude
5,000 m (for Reliability) 3,000m(for FOS)
9
Operating Environment
Temp : 10 °C ~ 35 °C
Humidity : 20 % ~ 80 %
10 Storage Environment
Temp : -10 °C ~ 60 °C non condensing
Humidity : 5 % ~ 90 % non condensing
Click on the first or last page to see other 22LS2100 (CHASSIS:LD93Q / LP93Q) service manuals if exist.