Read LG 20HIZ12 (CHASSIS:ML-041F) Service Manual online
- 6 -
1. Application range
This specification is applied to ML-041F chassis.
2. Requirement for Test
Testing for standard of each part must be followed in below
condition.
condition.
(1) Temperature: 25°C ± 2°C
(2) Humidity: 65% ± 10%
(3) Power: Standard input voltage (AC 100-240V, 50/60Hz)
(4) Measurement must be performed after heat-run more than
(2) Humidity: 65% ± 10%
(3) Power: Standard input voltage (AC 100-240V, 50/60Hz)
(4) Measurement must be performed after heat-run more than
30min.
(5) Adjusting standard for this chassis is followed a special
standard.
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement.
3.General Specification
No.
Item
Content
Remark
1
LCD Module Feature
Maker
LPL
Type
TFT Color LCD Module
Active Display Area
20.1 inches(510.00) duaginal
Pixel Pitch [mm]
0.6375mm(H) x 0.6375mm(V) x RGB
Electrical Interface
TTL
LPL
Color Depth
8bits, 16,777,216 color
Size[mm]
450(H) x 3348.7(V) x 20(D)
Surface Treatment
Glare, Hard Coating (3H)
Operating Mode
Normally Black
Black Light Unit
6CCFL(6 lamps)
R/T Typ.
16ms(R.T : 7/10ms + F.T. : 18/20ms)
Click on the first or last page to see other 20HIZ12 (CHASSIS:ML-041F) service manuals if exist.