Read JBL P6432 User Guide / Operation Manual online
order that we may better serve you
should you require warranty service on
your new speakers, please retain your
original purchase receipt and return the
enclosed warranty registration card.
stereo components can require extensive
experience performing a variety of
mechanical and electrical procedures.
Although these instructions explain in a
general sense how to install Power Series
loudspeakers, they may not show the
exact installation methods for your
particular vehicle. If you feel you lack the
tools or necessary experience, ask your
authorized JBL car-audio dealer about
professional installation options.
• Always wear protective eyewear when
Disconnect the negative (–) lead from
your vehicle’s battery.
speaker, always rest it with the cone or
dome facing up. Never use force to
install any speaker.
drilling any holes or installing any
screws. Remember that the screws can
extend behind the surface.
brake lines, vacuum lines and electrical
wiring. Use extreme caution when cut-
ting or drilling in and around these
located directly beneath the rear deck.
Check for adequate speaker-basket
clearance before considering use of
• Before drilling for the speakers or
remove unwanted fabric or vinyl to
keep material from snagging in a drill
bit or saw.
closed and open positions and verify
that a mounted speaker will not
interfere with the window crank or
structural elements, check for
mobile can permanently damage your
hearing as well as hinder your ability to
hear traffic. We recommend listening at
low levels while in your car. JBL accepts
no liability for hearing loss, bodily injury
or property damage resulting from use or
misuse of this product.
direct replacements for original-equipment speakers
mounted behind factory grilles.
behind factory grilles, omit the grille and grille tray in
of the mounting ears to be removed from the P-432.
Remove your original speakers first to determine
whether any mounting ears must be removed.
openings for 6-1/2" speakers.
must make sure that the rings are mounted to a
completely flat surface.
mounting system. Intermount III™ provides for easy installation of these speakers in many standard
and nonstandard locations that will accommodate a 6-1/2" speaker.