Read JBL GTS 100 (serv.man2) User Guide / Operation Manual online
7
controls (Volume, Balance, Bass,
Treble) may be connected to the pre-
amp-level inputs at the same time as a
powered radio/tape unit is connected to
the speaker-level inputs. This provides
a higher performance alternative to an
FM Modulator connection when you
wish to add CD capability to a factory
installed cassette radio. Switching from
one source to the other is as simple as
turning the desired source on and turn-
ing the undesired one off — no addi-
tional switches or relay connections are
needed.
Treble) may be connected to the pre-
amp-level inputs at the same time as a
powered radio/tape unit is connected to
the speaker-level inputs. This provides
a higher performance alternative to an
FM Modulator connection when you
wish to add CD capability to a factory
installed cassette radio. Switching from
one source to the other is as simple as
turning the desired source on and turn-
ing the undesired one off — no addi-
tional switches or relay connections are
needed.
Typical Applications
Other Components
The system options of the GTS100
are numerous. All JBL amplifiers are
designed with sufficient adjustment
range to match with the accepted “nor-
mal” voltages and impedances used by
virtually all car audio components. With
very few exceptions, the GTS100 will
match correctly to any equipment you
already have.
The system options of the GTS100
are numerous. All JBL amplifiers are
designed with sufficient adjustment
range to match with the accepted “nor-
mal” voltages and impedances used by
virtually all car audio components. With
very few exceptions, the GTS100 will
match correctly to any equipment you
already have.
2 or 4-Ohm
Full-Range
Speakers or
Subwoofers
L– L+
– +
R– R+
– +
GTS100
GTS
100
Application 1
Stereo Full-Range or Subwoofer Operation
Full-Range Operation
Subwoofer Operation
Crossover Input Mode Line
Switch Switch Switch
Off
Switch Switch Switch
Off
Stereo
In
Crossover Input Mode Line
Switch Switch Switch
Low
Switch Switch Switch
Low
Stereo
In
Main speakers are driven by head unit or additional amplifier.
Preamp or
Speaker-Level
Input
L
R
The following diagrams show the most common basic system configurations using the
GTS100. More elaborate systems are formed by using a combination of these “building
blocks.” For additional ideas, refer to the “Add On and Upgrade Section” near the end
of this manual.
GTS100. More elaborate systems are formed by using a combination of these “building
blocks.” For additional ideas, refer to the “Add On and Upgrade Section” near the end
of this manual.
JBL 1394 Manual 7/17/98 11:49 AM Page 7
Click on the first or last page to see other GTS 100 (serv.man2) service manuals if exist.