Read JBL GTS 100 (serv.man2) User Guide / Operation Manual online
29
Specifications
Continuous Power Output
35 watts x 2
(20Hz – 20kHz,
(4 Ohms, 0.05% THD)
14.4V Battery Voltage)
50 watts x 2
(2 Ohms, 0.08% THD)
100 Watts x 1
(4 Ohms, 0.08% THD)
(2 Ohms, 0.08% THD)
100 Watts x 1
(4 Ohms, 0.08% THD)
Signal to Noise Ratio
100dBA
Frequency Response
10Hz – 50kHz (+0, – 1dB)
20Hz – 20kHz (+0, – 0.1dB)
20Hz – 20kHz (+0, – 0.1dB)
Damping Factor
>200
Slew Factor
>5
Line Level Input Sensitivity
100mV – 4V RMS (500mV at center detent)
(for rated power)
Line Level Input Impedance
10k Ohms
Speaker Level Input Impedance
15 Ohms
Speaker Level Input Sensitivity
200mV – 8V RMS (1V at center detent)
Preamp Output Sensitivity
2V Out for 4V Speaker Level Input
Minimum Speaker Impedance
Single Ended, Non-Bridged
2 Ohms
Bridged
4 Ohms
Built-In Electronic Crossover
80Hz, 18dB per octave Low Pass Filter
Frequency and Slope
100Hz, 18dB per octave High Pass Filter
Power Requirement
11 to 16V DC Negative Ground
Fuse Size
20 Amp ATC Type Fuse
Size (L x W x H)
6
5
/
8
" x 9
1
/
4
" x 2"
(168.3mm x 235.0mm x 50.8mm)
Weight
4lbs. 3oz. (1.90kg)
Speaker Input / Output Mating
Molex Mini-Fit Jr. # 39-01-2040
Connector
Metal Pins: 39-00-0038
Power Mating Connector
Plastic Housing: AMP #1-480700-0
Metal Pins for Ground & +12V: AMP # 350923-3
Metal Pins for Rem. In: AMP # 350536-1
Metal Pins for Ground & +12V: AMP # 350923-3
Metal Pins for Rem. In: AMP # 350536-1
JBL 1394 Manual 7/17/98 11:49 AM Page 29
Click on the first or last page to see other GTS 100 (serv.man2) service manuals if exist.