CS 200.1 (serv.man9) - JBL Car Audio User Guide / Operation Manual. Page 3

The CS subwoofer amplifiers are 
single-channel amplifiers. There are
two sets of terminals to make it easy 
to connect multiple woofers. Either 
set of (+/–) terminals may be used when
connecting woofers.
To the right are two application 
diagrams to help plan your subwoofer
system installation. Figures 2 and 3
show how to configure the CS200.1
subwoofer amplifiers.

NOTE: For simplicity, Figures 2 and 3 
do not show power, remote and input
connections.

NOTE: Minimum speaker load is 
2 ohms.

Figure 2. CS subwoofer amplifier with two
woofer connections.

Figure 3. CS subwoofer amplifier with one woofer
connection.

Figure 4. CS50.4 amplifier in 4-channel (stereo)
operation to drive front and rear full-range speakers.

The CS50.4 can be set up for stereo 
4-channel, 3-channel or bridged 
2-channel operation, as shown in 
Figures 4 through 6.

NOTE: For simplicity, Figures 4 through 6 do
not show power, remote and input 
connections.

NOTE: Minimum speaker impedance for
stereo operation is 2 ohms.
Minimum speaker impedance for bridged
operation is 4 ohms.

Figure 5. CS50.4 is set up for 3-channel operation to
drive a set of full-range speakers and a subwoofer.

Figure 6. CS50.4 used in bridged 2-channel mode 
to drive a set of components or subwoofers. 
Set crossovers according to application.