BASSPRO (serv.man6) - JBL Car Audio User Guide / Operation Manual. Page 2

Playing loud music in an automobile can
hinder your ability to hear traffic and
permanently damage your hearing. 
We recommend listening at low or
moderate levels while driving your car. 
JBL accepts no liability for hearing loss,
bodily injury or property damage
resulting from the use or misuse of this
product.

• Always wear protective eyewear 

when using tools.

• Disconnect the vehicle’s negative (–)

battery terminal before starting the
installation.

• Check clearances on both sides of a

planned mounting surface. Be sure
that screws or wires will not puncture
brake lines, fuel lines or wiring
harnesses, and that wire routing will
not interfere with the safe operation of
the vehicle.

• When making electrical connections,

make sure they are secure and
properly insulated.

• If BassPro’s fuse must be replaced, be

sure to use the same type of fuse and
current rating as that of the original.

Choose a mounting location that doesn’t
interfere with cargo, the fold-down rear
seat or the trunk lid. The best location is
usually a corner of the trunk or cargo
area, as shown in Figures 1 and 2.

Securely mount BassPro to the
mounting surface using the four
enclosed self-tapping screws.

Choose a mounting location in the front
of the vehicle for the remote level
control.

Figure 3. Bottom view of BassPro.