Read JBL A302GTi User Guide / Operation Manual online
Installing the Remote Level Control
(A1201GTi and A601GTi only) and
Status Monitor
Choose a location for the remote
level control that is within your reach
while you are seated in the driving
position. Attach the level control to
the mounting surface using screws
through the mounting tabs, as shown
in Figure 4. Connect the RJ11 cable
between the status monitor and the
remote level control.
(A1201GTi and A601GTi only) and
Status Monitor
Choose a location for the remote
level control that is within your reach
while you are seated in the driving
position. Attach the level control to
the mounting surface using screws
through the mounting tabs, as shown
in Figure 4. Connect the RJ11 cable
between the status monitor and the
remote level control.
Note: In order to use the remote
level control with the A1201GTi
or the A601GTi, the status monitor
must be installed. The remote
level control will not work with
the A302GTi.
level control with the A1201GTi
or the A601GTi, the status monitor
must be installed. The remote
level control will not work with
the A302GTi.
Controlling More Than One
A601GTi or A1201GTi With a
Single Remote Level Control
In order to control several GTi Series
amplifiers with a single level control,
you must purchase an RJ11 splitter,
several splitters or a break-out box.
These adapters are available at many
stores that sell telephone accessories.
Up to five amplifiers may be
controlled with a single level control.
In addition to the RJ11 adapters,
you must also purchase RCA-type “Y”
adapters to provide input signal to
each of the amplifiers. See Figure 5
below for connections.
A601GTi or A1201GTi With a
Single Remote Level Control
In order to control several GTi Series
amplifiers with a single level control,
you must purchase an RJ11 splitter,
several splitters or a break-out box.
These adapters are available at many
stores that sell telephone accessories.
Up to five amplifiers may be
controlled with a single level control.
In addition to the RJ11 adapters,
you must also purchase RCA-type “Y”
adapters to provide input signal to
each of the amplifiers. See Figure 5
below for connections.
HEAD UNIT
TO ADDITIONAL AMPLIFIERS
RCA
Y-CABLE
RCA
Y-CABLE
RJ11
PHONE
JUNCTION
ADAPTER
PHONE
JUNCTION
ADAPTER
(not supplied)
SUB LEVEL
CONTROL
SUB LEVEL
MIN
MAX
RCA
Y-CABLE
A1201GTi
R
L
INPUT
LEVEL
LEVEL
4V 55mV
REMOTE
LPF
FREQ
30Hz 320Hz
BASS
BOOST
0dB +6dB
R
L
FRONT INPUTS
REAR INPUTS
A1201GTi
R
L
INPUT
LEVEL
LEVEL
4V 55mV
REMOTE
LPF
FREQ
30Hz 320Hz
BASS
BOOST
0dB +6dB
R
L
FRONT INPUTS
REAR INPUTS
A1201GTi
R
L
INPUT
LEVEL
LEVEL
4V 55mV
REMOTE
LPF
FREQ
30Hz 320Hz
BASS
BOOST
0dB +6dB
R
L
FRONT INPUTS
REAR INPUTS
STATUS
MONITOR
STATUS
MONITOR
STATUS
MONITOR
Figure 4. Mounting the level control
05
PRO POWER
TM
Figure 5. Controlling multiple amps
with a single level control
with a single level control
Click on the first or last page to see other A302GTi service manuals if exist.