Read JBL 408 GTi User Guide / Operation Manual online
Tweeter Surface Angle Mounting
Instructions
Instructions
a) Using the Surface Angle Mount
Template at the back of the manual, drill
two screw holes at the desired mounting
location, making sure to choose the
correct tweeter orientation. Secure the
Surface Angle Mount Adapter with two
Template at the back of the manual, drill
two screw holes at the desired mounting
location, making sure to choose the
correct tweeter orientation. Secure the
Surface Angle Mount Adapter with two
3
⁄
4
"
sheet metal screws as shown in Figure G.
b) Secure the mounting plate to surface
angle mount adapter using two
angle mount adapter using two
5
⁄
16
" screws.
c) Run the speaker wire from the 408 and
508GTi Crossover to the wire through hole
and connect the wire to the tweeter
making sure to connect + to + and – to –
by either soldering (preferred) or using
crimp-on connectors.
508GTi Crossover to the wire through hole
and connect the wire to the tweeter
making sure to connect + to + and – to –
by either soldering (preferred) or using
crimp-on connectors.
d) Push the tweeter down onto the
mounting plate making sure to line up the
bayonet tabs with the slots in the tweeter
housing.
mounting plate making sure to line up the
bayonet tabs with the slots in the tweeter
housing.
e) Twist the tweeter clockwise about
1
⁄
4
" to
lock it into position.
9
A
B
D
C
Figure G
TWEETER SURFACE ANGLE INSTALLATION
408/508 MANUAL.QXP 7/17/98 11:21 AM Page 9
Click on the first or last page to see other 408 GTi service manuals if exist.