Read JBL 08 GTi User Guide / Operation Manual online
A
B
D
C
Surface Angle Mounting
Instructions
Instructions
a) Using the Surface Angle
Mount template at the back of
the manual, drill two screw holes
at the desired mounting location.
Secure the Surface angle mount
adapter with two
Mount template at the back of
the manual, drill two screw holes
at the desired mounting location.
Secure the Surface angle mount
adapter with two
3
⁄
4
" sheet metal
screws as shown in figure B.
b) Secure the mounting plate to
surface angle mount adapter
using two
surface angle mount adapter
using two
5
⁄
16
" screws.
c) Run the included speaker wire
with the 08GTi crossover to the
wire through hole and connect
with the 08GTi crossover to the
wire through hole and connect
the wire to the tweeter making
sure to connect + to + and
– to –.
sure to connect + to + and
– to –.
d) Push the tweeter down onto
the mounting plate making sure
to line up the bayonet tabs with
the slots in the tweeter housing.
the mounting plate making sure
to line up the bayonet tabs with
the slots in the tweeter housing.
e) Twist the tweeter clockwise
about
about
1
⁄
4
" to lock it into position.
12
08GTi Owners Manual 9/17/98 4:17 PM Page 12
Click on the first or last page to see other 08 GTi service manuals if exist.