Read JBL VOYAGER (serv.man2) EMC - CB Certificate online
Report No.: EM201300534-2 Application No.: ZJ00032799 Page 11 of 58
emission level in the preliminary test. The Analyzer / Receiver scanned from 30MHz to
300MHz. Emissions were scanned and measured rotating the EUT to 360 degrees, varying
cable placement and positioning the antenna 1 to 4 meters above the ground plane, in both the
vertical and the horizontal polarization, to maximize the emission reading level. Record at
least six highest emissions. Emission frequency, amplitude, antenna position, polarization
and turntable position were recorded into a computer in which correction factors were used to
calculate the emission level and compare reading to the applicable limit and only QP reading
is presented. The test data of the worst-case condition(s) was recorded.
300MHz. Emissions were scanned and measured rotating the EUT to 360 degrees, varying
cable placement and positioning the antenna 1 to 4 meters above the ground plane, in both the
vertical and the horizontal polarization, to maximize the emission reading level. Record at
least six highest emissions. Emission frequency, amplitude, antenna position, polarization
and turntable position were recorded into a computer in which correction factors were used to
calculate the emission level and compare reading to the applicable limit and only QP reading
is presented. The test data of the worst-case condition(s) was recorded.
4.1.3 TEST SETUP
Figure 1. 30MHz to 1GHz radiated emissions test configuration
Figure 2. Above 1GHz radiated emissions test configuration
Click on the first or last page to see other VOYAGER (serv.man2) service manuals if exist.