TiK CENTER (serv.man2) - JBL Audio User Guide / Operation Manual. Page 5

Read JBL TiK CENTER (serv.man2) User Guide / Operation Manual online

SERVICE
JBL Ti Series loudspeakers are designed to give years of trouble-free
service. No periodic maintenance is required. If a problem is
suspected, first make sure all connections are properly made. If a
problem exists in one loudspeaker, reverse the speaker wires to the
left and right speaker. If the problem remains in the same speaker,
then the fault is in the loudspeaker. If the problem moves to the
other speaker, the cause is in another component or cable.
Loudspeaker cones or diaphragms should not be moved by hand.
The voice coil assembly is located with extreme precision and the
clearance is very small. Any attempt to move the assembly by hand
can easily force the voice coil out of alignment and cause distortion
or failure.
Should your loudspeaker system ever need service, return it to the
JBL dealer from whom it was purchased. If for some reason this is
impractical, write directly to the JBL Customer Service Department,
describing the problem as fully as possible.
Do not return products to the JBL factory without prior 
authorization. Address correspondence to: JBL Customer Service,
250 Crossways Park Drive, Woodbury, NY 11797, Telephone: 
1-516-496-3400 or 1-800-645-7292. Outside the United States,
contact your local JBL distributor.
Declaration of Conformity
Kongevejen 194B 
DK-3460 Birkerød
DENMARK
declare in own responsibility, that the product described
in this owner's manual is in compliance with technical
standards:
EN 55 013/6. 1990
EN 55 020/4. 1994
EN 55 022/5. 1995
EN 60 065. 1993
EN 60 555 Part 2/4. 1987
Steen Michaelsen
Birkerød. DENMARK. 06/98
Birkerød DENMARK 1/99
EN 50 081-1/1992
EN 50 082-1/3.1995
Page of 10
Display

Click on the first or last page to see other TiK CENTER (serv.man2) service manuals if exist.