Read JBL SUB 560P Service Manual online
2
Included Items
1X
1X
1X
usInG tHe suPPlIed sPIKes
Four metal spikes are supplied for use when you place the subwoofer
on a carpeted surface. Using the spikes decouples the subwoofer from
the floor and prevents unwanted acoustic damping.
To inserT The spikes:
1. Gently turn the subwoofer upside down on a soft, nonabrasive
surface.
2. Unscrew and remove the rubber bumpers from the subwoofer’s feet.
3. Screw each spike into the threaded insert in each foot. Make sure all
four spikes are screwed in completely for stability.
noTe: neVer drag the subwoofer to move it, as this will damage
the spikes, the feet and/or the subwoofer cabinet itself. Always
lift the subwoofer and carry it to its new location.
tHanK You For cHoosInG tHIs JBl
®
Product
Your new JBL
®
SUB 560P 400-watt powered subwoofer incorporates a 12" (300mm) forward-firing cone transducer and a built-in high-performance
400-watt RMS amplifier that deliver the powerful, dynamic and accurate low-frequency performance that makes your film soundtracks and music
come alive. And with line-level and LFE inputs, adjustable crossover and phase controls and automatic turn on/off, the SUB 560P is also simple to
connect and set up.
We’re confident that this JBL subwoofer will provide every note of enjoyment that you expect – and that when you think about purchasing additional
audio equipment for your home, car or office, you will once again choose JBL products.
This owner’s manual contains all the information you need to set up, connect and adjust your new subwoofer. For even more in-depth information,
go to our Web site: www.jbl.com.
CAUTion
To prevent electric shock
hazard replace grille
iMporTAnT: This subwoofer requires proper ventilation and is not to be used in an enclosed environment.
JBL
SUB 560P Service Manual
Page 3 of 18
Click on the first or last page to see other SUB 560P service manuals if exist.