Read JBL SU 7000 User Guide / Operation Manual online
Troubleshooting
two.
Speaker Connections
Connection Tips
Speakers and electronics terminals have corresponding (+) and
(–) terminals. It is important to connect both speakers identi-
cally: (+) on the speaker to (+) on the amplifier and (–) on the
speaker to (–) on the amplifier. Wiring “out of phase” results in
thin sound, weak bass and a poor stereo image.
(–) terminals. It is important to connect both speakers identi-
cally: (+) on the speaker to (+) on the amplifier and (–) on the
speaker to (–) on the amplifier. Wiring “out of phase” results in
thin sound, weak bass and a poor stereo image.
If there is no sound from
any of the speakers, check
the following:
any of the speakers, check
the following:
• Receiver/amplifier is on an d
a source is playing.
• Review proper operation of
your receiver/amplifier.
a source is playing.
• Review proper operation of
your receiver/amplifier.
If there is no sound coming
from one speaker, check the
following:
from one speaker, check the
following:
• Check the “Balance” control
on your receiver/amplifier.
• Check all wires and connec-
tions between receiver/
amplifier and speakers.
• Make sure all wires are
connected. Make sure none of
the speaker wires are frayed,
cut, or punctured.
on your receiver/amplifier.
• Check all wires and connec-
tions between receiver/
amplifier and speakers.
• Make sure all wires are
connected. Make sure none of
the speaker wires are frayed,
cut, or punctured.
If the system plays at low
volumes but shuts off as
volume is increased, check
the following:
volumes but shuts off as
volume is increased, check
the following:
• Check all wires and connec -
tions between receiver/
amplifier and speakers.
• Make sure all wires are con -
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
• If more than one pair o f
main speakers is being used,
check the minimum imped-
ance requirements of your
receiver/amplifier.
tions between receiver/
amplifier and speakers.
• Make sure all wires are con -
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
• If more than one pair o f
main speakers is being used,
check the minimum imped-
ance requirements of your
receiver/amplifier.
If there is low bass output,
check the following:
check the following:
• Make sure the polarity
(+ and –) of the left an d
right “Speaker Inputs” are
connected properly.
(+ and –) of the left an d
right “Speaker Inputs” are
connected properly.
SU Series OM 7/22/98 3:13 PM Page 3
Click on the first or last page to see other SU 7000 service manuals if exist.