Read JBL SP 6C (serv.man11) User Guide / Operation Manual online
5
SP5, SP6
E X I S T I N G C O N S T R U C T I O N
Remove the grille from the
speaker frame.
speaker frame.
Determine the correct
speaker location.
speaker location.
Template
Level
NOTE: Always allow at least one-
half inch between a wall stud
and the speaker cutout or the
locking tabs will not be able to
swivel into place.
half inch between a wall stud
and the speaker cutout or the
locking tabs will not be able to
swivel into place.
≥
1/2"
≥
1/2"
≥
1/2"
Cut the dry wall.
Connect the speaker wires
to the speaker.
to the speaker.
Replace the metal grille.
Place the frame assembly
in the wall.
in the wall.
Screw down each of the four
Phillips head screws. The
locking tabs will swivel into
place and secure the unit to
the rear surface of the drywall.
Phillips head screws. The
locking tabs will swivel into
place and secure the unit to
the rear surface of the drywall.
Click on the first or last page to see other SP 6C (serv.man11) service manuals if exist.