Read JBL SDP-40 HD EMC - CB Certificate online
TEST NUMBER - 254-05
Test Report to
EN 61000-3-3:1995 with Amendment A1:2001
Limitations of Voltage Fluctuations and Flicker
and
EN 61000-3-2:2000
Limits of Harmonic Current Emissions Class A
for
Harman Specialty Group
3 Oak Park Drive
Bedford, MA 01730
781-280-0300
of
Digital Controller
MC12B HD with Balanced Output option
on
08/09/2005
Tested by
Clifton P. Brick
Reviewed by
This report may not be duplicated, except in full without written
permission from Compliance Worldwide, Inc.
Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873
(603) 887 3903 Fax 887 6445
Test Number - 254-05
TABLE OF CONTENTS
• Test Description
• Test Results and Conclusions
• Test Procedures
• Equipment Classification
• EN 61000-3-3 Test Limits
• EN 61000-3-2 Test Limits
• Test Measurements and Results
Flicker Measurements
Harmonic Current Measurements
• Notes and Comments
• Photographs
• Photographs
Harmonics and Flicker Test Setup
Page 2 of 18
Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873
(603) 887 3903 Fax 887 6445
Test Number - 254-05
TEST DESCRIPTION
1. TEST OBJECTIVE
To test the Digital Controller to EN61000-3-3 and
EN61000-3-2 Class A limits and write a report.
2. E.U.T. DESCRIPTION
GENERAL
The Digital Controller MC12B HD with Balanced Output
option is an audio video processor and switcher.
SERIAL
NUMBERS:
L0204-4000.
Page 3 of 18
Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873
(603) 887 3903 Fax 887 6445
Test Number - 254-05
TEST RESULTS AND CONCLUSIONS
PRODUCT TESTED - Digital Controller
MODEL NUMBER - MC12B HD with Balanced Output option
FLICKER TEST RESULTS
FLICKER TEST RESULTS
The test results show that the emissions radiated from this equipment
are in compliance with EN 61000-3-3 Rules.
HARMONICS TEST RESULTS
The test results show that the harmonic current emissions radiated from
this equipment are in compliance with EN 61000-3-2 Rules.
ANALYSIS AND CONCLUSIONS
Based upon the short and long term measurements we find that this equipment is
within the limits of the EN 61000-3-3 and EN 61000-3-2 rules. All results are
based on a test of one sample, and represent other production units, only in
as much as a sample represents other production units. If any significant
changes are made to the unit, the changes shall be evaluated and a retest may
be required.
within the limits of the EN 61000-3-3 and EN 61000-3-2 rules. All results are
based on a test of one sample, and represent other production units, only in
as much as a sample represents other production units. If any significant
changes are made to the unit, the changes shall be evaluated and a retest may
be required.
NOTES (Special conditions unique to this test)
Notes
Page 4 of 18
Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873
(603) 887 3903 Fax 887 6445
