Read JBL SCS 200 (serv.man13) Service Manual online
13
If there is no sound from
the surround speakers:
the surround speakers:
• Check all wires and con-
nections between receiver/
amplifier and speakers.
Make sure all wires are
connected. Make sure
none of the speaker wires
are frayed, cut or punc-
tured, or touching each
other.
amplifier and speakers.
Make sure all wires are
connected. Make sure
none of the speaker wires
are frayed, cut or punc-
tured, or touching each
other.
• Review proper operation of
your receiver/amplifier and
its surround sound fea-
tures.
its surround sound fea-
tures.
• Make sure the movie or
TV show you are watching
is recorded in a surround
sound mode. If it is not,
check to see whether your
receiver/amplifier has other
surround modes you may
use.
is recorded in a surround
sound mode. If it is not,
check to see whether your
receiver/amplifier has other
surround modes you may
use.
• In Dolby Digital or DTS
modes, make sure your
receiver/processor is con-
figured so that the surround
speakers are enabled.
When all five satellites are
in use, remember to config-
ure your receiver or proces-
sor for 6.1-channel opera-
tion.
receiver/processor is con-
figured so that the surround
speakers are enabled.
When all five satellites are
in use, remember to config-
ure your receiver or proces-
sor for 6.1-channel opera-
tion.
• Review the operation of
your DVD player and the
jacket of your DVD to make
sure that the DVD features
the desired Dolby Digital or
DTS mode, and that you
have properly selected that
mode using both the DVD
player’s menu and the DVD
disc’s menu.
jacket of your DVD to make
sure that the DVD features
the desired Dolby Digital or
DTS mode, and that you
have properly selected that
mode using both the DVD
player’s menu and the DVD
disc’s menu.
JBL
SCS200.5/230 Service Manual
Page 14 of 53
Click on the first or last page to see other SCS 200 (serv.man13) service manuals if exist.