SCS 175 Sub (serv.man5) - JBL Audio User Guide / Operation Manual. Page 5

Read JBL SCS 175 Sub (serv.man5) User Guide / Operation Manual online

Center
+      –
+      –
+      –
Left Front
+      –
Left Surround
Center
Right Front
+      –
Right Surround
Receiver
+      –
Left Front
–      +
Right Front
–      +
Left Surround
+      –
Right Surround
+      –
L
R
Subwoofer out
Serie no.
Made in Denmark
Harman Consumer International
TM
SCS175
 (230V)
simple
setup guide
Line Level
min        max
Subwoofer
Level
min        max
Subwoofer
Level
Volume
If your receiver has subwoofer
output jacks, you may connect
the SCS175 using this method.
Note: Some receivers/
amplifiers have a single
(mono) subwoofer output. In
this case, it is recommended
that you use a “Y”-connector
(not included) to maximize the
subwoofer’s performance.
Crossover Frequency
The crossover frequency knob
determines the highest frequen-
cy your subwoofer will reprodu-
ce. It allows a seamless transi-
tion from the subwoofer to the
satellite speakers. Experiment
with this adjustment to find
the crossover frequency that
sounds best with your speakers. 
When the control is at the 
40 Hz“ position, very few
high frequencies will be heard.
This position is best suited to
large main speakers. For most
users, the control should be
set somewhere near the mid
position. For listeners using
very small speakers, best
results will be obtained with
the control at the ”130 Hz
position. 
For subwoofers used with
Surround Sound processors
with dedicated subwoofer out-
puts, the best result will be
obtained with the control at
the ”130 Hz“ position. 
Page of 7
Display

Click on the first or last page to see other SCS 175 Sub (serv.man5) service manuals if exist.